Phoenix Contact MINI MCR, Isolation Galvanic Isolator, Current, Voltage

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

3-Way Isolation Amplifier

From Phoneix Contacts, the DIN-Rail mounted MCR-C 3-way signal conditioners are used for electrical isolation and conversion of analogue signals. Three-way electrical isolation ensures reliable decoupling of the sensor circuit from the processing circuit, thus also preventing several distributed measurement circuits from influencing one another.

Method of Operation

The analogue signal is modulated before being electrically isolated by means of a transmitter. The electrically isolated signal is then demodulated, filtered, amplified and made available at the output.

Features and Benefits

• DIN Rail Mounting
• Processing of standard signals
• 3-way isolation
• Fixed setting of input and output signals

Specificaties
Kenmerk Waarde
Input Type Current, Voltage
Output Type Current, Voltage
Signal Conditioner Type Isolation
Input Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Output Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 → +65 °C
Series MINI MCR-SL-UI-SP-NC
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
204,03
(excl. BTW)
246,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 204,03
Related Products
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applicationsElectrical 3-way isolationScrew or spring-cage connections are availableIP20 protectionWidth only 12.5 mm.
DIP switches allow reconfiguration of inputs & outputs ...
Description:
DIP switches allow reconfiguration of inputs & outputs of the isolation amplifier, enabling over 160 amplification settingsTwo potentiometers accessible from front adjustment of zero point (zeroing) & amplification (span) for gauge calibration.
These isolators can be mounted on DIN rail ...
Description:
These isolators can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. No separate supply voltage necessary. Single and dual channel ...
Can can be mounted on DIN rail individually ...
Description:
Can can be mounted on DIN rail individually or with other units. The housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products.,Required a 24Vdc supply, either directly to module terminals or via ...