Jumo TYA-202, Voltage to Current Signal Conditioner, Voltage 400 V ac Input

  • RS-stocknr. 793-4054
  • Fabrikantnummer 709062/8-01-020-100-400-00/252
  • Fabrikant Jumo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

TYA-202 3-Phase Power Controller

The micro-processor controlled three-phase power controller Jumo TYA 202 displays all parameters in a backlighted LCD display and is operated using the 4 keys on the front.
SCR power controllers are employed where larger resistive and ohmic-inductive loads have to be switched, e.g. in industrial kiln construction and in plastics processing. The SCR power controller comprises two SCRs connected in anti-parallel, the insulated cooling body and the control electronics.
The operating modes are burst-firing mode, SSR logical operation, fast logical operation, alpha start and soft start.
Available subordinate controls are U, U2, I, I2 and P control.
Use of a subordinate control ensures that fluctuations in the supply voltage do not affect the control loop during the control process.

Three-phase SCR power controller
Simple configuration of the device through plain text display
Setup program for configuration via USB interface
Transmission of the setup data is possible even without voltage supply to the device (USB port supplies power)
Network load optimization through dual energy management
Burst-firing mode
Soft start function with pulse groups
Resistance monitoring and limitation for MoSi2 heating elements
Teach-in function for the detection of partial load failure
Integrated diagnostic systems (e.g. rotating field detection)

Specificaties
Kenmerk Waarde
Input Type Voltage
Output Type Current
Signal Conditioner Type Voltage to Current
Input Range 400 V ac
Output Range 0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 2 → 10 V, 4 → 20 mA
Supply Voltage 400 V
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +45°C
Termination Screw
Operating Temperature Range 0 → +45 °C
Series TYA-202
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
522,60
(excl. BTW)
632,35
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 522,60
Related Products
TELE GAMMA series AC and DC voltage monitoring ...
Description:
TELE GAMMA series AC and DC voltage monitoring relay. Multifunction monitoring in a slim easy to use package. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminals2 change over contactMultifunction. ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Description:
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...
MurrElektronik earth fault relays provides monitoring of earth ...
Description:
MurrElektronik earth fault relays provides monitoring of earth fault currents. When the fault current rises above the selected level, the output contacts of the product operate. Status LED Screw terminals 35mm DIN Rail mounting.
Converts digital coded signals into standardised analogue signalsOutput: ...
Description:
Converts digital coded signals into standardised analogue signalsOutput: 0 to 10VModules for 8 or 12-bit coded digital signalsHOLD signal allows time controlModules are bus-capableConnection on the digital side via Combicon plugCan be mounted on all common EN mounting rails.