XinaBox xCHIP Universal Analog Input MCU Module SX02
- RS-stocknr.:
- 174-3749
- Fabrikantnummer:
- SX02
- Fabrikant:
- XinaBox
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 174-3749
- Fabrikantnummer:
- SX02
- Fabrikant:
- XinaBox
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
xChip Boards
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.
xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.
xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.
Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs
xChips connect to each other using an xBus connector, available from RS 174-4977.
Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.
xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.
xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.
Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs
xChips connect to each other using an xBus connector, available from RS 174-4977.
Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.
This XCHIP is a low-power, monolithic, 8-bit, analog-to-digital converter (ADC).
Product Highlights
I²C-Compatible 2-Wire Interface Which Supports Standard, Fast, and High Speed Modes
Applications
System Monitoring
Peak Detection
Portable Instruments
Medical Instruments
Test Equipment
Specifications
I²C-Compatible 2-Wire Interface Which Supports Standard (100 kHz), Fast (400 kHz), and High Speed (3.4 MHz) Modes
Out-of-Range Alert Function
Automatic Power-Down Mode While Not Converting
I²C-Compatible 2-Wire Interface Which Supports Standard, Fast, and High Speed Modes
Applications
System Monitoring
Peak Detection
Portable Instruments
Medical Instruments
Test Equipment
Specifications
I²C-Compatible 2-Wire Interface Which Supports Standard (100 kHz), Fast (400 kHz), and High Speed (3.4 MHz) Modes
Out-of-Range Alert Function
Automatic Power-Down Mode While Not Converting
Xinabox Modular Prototyping Boards
Specificaties
Kenmerk | Waarde |
|---|---|
| Kit Classification | Development Board |
| Converter Type | ADC |
| Kit Name | xCHIP Universal Analog Input |