Analog Devices EVAL-CN0185-EB1Z, Analogue Isolator Evaluation Board for AD7400

  • RS-stocknr. 803-1605
  • Fabrikantnummer EVAL-CN0185-EB1Z
  • Fabrikant Analog Devices
Wetgeving en compliance

Evaluation Board for Analogue Isolator using AD7400A

An Analogue Devices evaluation board demonstrating a novel analogue-to-analogue isolator using an isolated Sigma-Delta Modulator, isolated DC-DC Converter and active filter.
The circuit is based on the AD7400A, a second-order, sigma-delta modulator with a digitally isolated 1-bit data stream output. The isolated analogue signal is recovered with a fourth-order active filter based on the dual, low noise, rail-to-rail AD8646 op amp. With the ADuM5000 as the power supply for the isolated side, the two sides are completely isolated and use only one power supply for the system. The circuit has 0.05% linearity and benefits from the noise shaping provided by the modulator of the AD7400A and the analogue filter. Typical applications include motor control and shunt current monitoring, and the circuit is also an excellent alternative to opto-based isolation systems.

The evaluation board includes the following ICs:

AD7400A Isolated Sigma-Delta Modulator
ADuM5000 Isolated DC-to-DC Converter
AD8646 Dual 24 MHz Rail-to-Rail I/O Op-Amp
ADP121 150mA CMOS Linear Regulator
ADP3301 High Accuracy 100 mA LDO Linear Regulator
ADG849 3V/5V CMOS 0.5Ω SPDT/2:1 MUX
ADR443 Ultra-low-noise LDO XFET 3.0V Reference

ADC Evaluation Boards and Development Kits, Analog

Kenmerk Waarde
Featured Device AD7400
Kit Classification Evaluation Board
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 59,63
Related Products
The ADM3065E is a 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceiver, allowing the device to withstand ±12 kV contact discharges on the transceiver bus pins without latch-up or damage. The ADM3066E features a VIO logic ...
The ADXRS453 is a ±300°/sec High Performance, Single-Axis ...
The ADXRS453 is a ±300°/sec High Performance, Single-Axis Digital Gyroscope. The simple breakout board makes easy connection of an ADXRS453 into an existing system. Ultra-high vibration rejectionSPI digital output with 16-bit data-wordBuilt-in temperature calibration3.3V and 5V operationInnovative ceramic vertical ...
The AD8233CB-EBZ evaluation board features the AD8233 Heart ...
The AD8233CB-EBZ evaluation board features the AD8233 Heart Rate Monitor Front End device. The board provides easy access to the AD8233 and the required components to test various configurations. Switches and jumpers are provided to set the input bias voltage, ...
Three evaluation Board from Analog Devices designed to ...
Three evaluation Board from Analog Devices designed to allow assessment of the AD4000 series of low-power precision analogue-to-digital converters (ADCs). The boards feature differential or pseudo-differential 2 MSPS SAR ADCs and can be configured for single-ended inputs. A precision buffered ...