RS PRO White Silicone Sealant Paste 310 ml Cartridge

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BE
Productomschrijving

Non-Corrosive Silicone Sealant

One-component, room temperature curing silicone elastomer. Cross linking takes place in the presence of moisture in the air to form a flexible resilient silicone rubber.,The material does not evolve any corrosive volatiles, e.g. acetic acid, amines, during cure and is therefore suitable for use on copper, its alloys and other sensitive metals. This property also results in a very low odour emission compared to acetoxy grades. The thixotropic paste has excellent adhesion to most materials (except PTFE and polyethylene) and can withstand temperatures of -40°C to +150°C whilst still maintaining chemical resistance. Typical uses are protection of semiconductor junctions, finishing protection of assemblies and delicate devices, sealing to copper clad items.

Note

Not considered to be 'food safe'.

Approvals

Exceeds BS5713

Specificaties
Kenmerk Waarde
Colour White
Application Copper, Semiconductor Junction Protection
Package Size 310 ml
Package Type Cartridge
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Food Processing Safe No
Chemical Type Elastomer
Physical Properties Neutral Cure, Non-Corrosive
Cure Time 7 (23 °C) days
Product Form Paste
Specific Gravity 1.43
Chemical Composition Stearic Acid
Tensile Strength 210N/cm
Operating Temperature Range -40 → +150 °C
Special Features Non Corrosive
Odour Sweet
Hardness 32 Shore A
101 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
16,81
(excl. BTW)
20,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 16,81
6 - 14
€ 16,13
15 +
€ 15,80
Related Products
A non-running, fast acting foaming gasket remover. Works ...
Description:
A non-running, fast acting foaming gasket remover. Works on vertical surfaces. Reduces scraping and sanding, and prevents damage to flanges. Fast acting, works in less than 20mins @ 25°CEffective from -35C to +35CRemoves old gaskets (incl. Silicone and mastics), also ...
3M™ Hybrid Adhesive Sealant 760 is a single ...
Description:
3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV. Excellent adhesionPaintable when wetAbove/below water line useLow VOC30 Minute skin time.
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
A one-component silicone sealant that gives excellent adhesion ...
Description:
A one-component silicone sealant that gives excellent adhesion to most non-porous surfaces. High modulus acetoxy cure typeFast cure, tack free in one hour5-10 minutes working timeJoint movement capability ±25%Contains fungicide to resist mould growthConforms to BS5889 type B, ISO11600-F-20HMAvailable in ...