- RS-stocknr.:
- 146-0719
- Fabrikantnummer:
- GP1S173LCS2F
- Fabrikant:
- Sharp
- RS-stocknr.:
- 146-0719
- Fabrikantnummer:
- GP1S173LCS2F
- Fabrikant:
- Sharp
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.
Transmissive with phototransistor output
Highlights Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant
Highlights Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm), Snap insertion
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 17 ´ 12.8 ´ 8mm (without connector and hooks), Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3)
RoHS directive compliant
Specificaties
Kenmerk | Waarde |
---|---|
Output Device | Phototransistor |
Number of Channels | 1 |
Typical Rise Time | 3µs |
Typical Fall Time | 4µs |
Mounting Type | Snap-In |
Number of Pins | 5 |
Dimensions | 27.1 x 9.8 x 16.3mm |
Height | 16.3mm |
Length | 27.1mm |
Maximum Operating Temperature | -30°C |
Minimum Operating Temperature | +95°C |
Slot Width | 4.3mm |
Width | 9.8mm |
Series | GP1S173L |
Operating Temperature Range | -30 → +95°C |
Output Signal Type | Analogue |