GP1A58HRJ00F Sharp, Through Hole Slotted Optical Switch, Photointerrupter Output
- RS-stocknr.:
- 146-0734
- Fabrikantnummer:
- GP1A58HRJ00F
- Fabrikant:
- Sharp
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 146-0734
- Fabrikantnummer:
- GP1A58HRJ00F
- Fabrikant:
- Sharp
Datasheets
Wetgeving en compliance
Productomschrijving
GP1A58HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device has a wide gap and positioning pins.
Transmissive with OPIC output
Highlights Vertical Slit for alternate motion detection, Output Low Level at intercepting optical path, Positioning Pin to prevent misalignment
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 13.7´10´5.2mm
RoHS directive compliant
Highlights Vertical Slit for alternate motion detection, Output Low Level at intercepting optical path, Positioning Pin to prevent misalignment
Key Parameters Gap Width : 5mm, Slit Width (detector side) : 0.5mm, Package : 13.7´10´5.2mm
RoHS directive compliant
Specificaties
Kenmerk | Waarde |
|---|---|
| Output Device | Photointerrupter |
| Number of Channels | 1 |
| Typical Rise Time | 0.1µs |
| Typical Fall Time | 0.05µs |
| Mounting Type | Through Hole |
| Number of Pins | 5 |
| Dimensions | 13.7 x 5.2 x 10mm |
| Height | 10mm |
| Length | 13.7mm |
| Maximum Operating Temperature | -25°C |
| Minimum Operating Temperature | +85°C |
| Slot Width | 5.2mm |
| Width | 5mm |
| Output Signal Type | Analogue |
| Operating Temperature Range | -25 → +85°C |
| Series | GP1A58HR |