OPB991L51Z Optek, Panel Mount Slotted Optical Switch, Transistor Output

  • RS-stocknr. 908-7249
  • Fabrikantnummer OPB991L51Z
  • Fabrikant Optek
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

OPB960, OPB970, OPB980 and OP990 Photologic Series Slotted Optical Switches

This family of Photologic® slotted optical switches, from Optek Technology, include a variety of options from a standard housing. These non-contact slotted optical switches have a range of different slot widths, output logic states, output driver circuits, aperture widths, aperture surfaces and mounting tab locations. There is also a combination of PCB mounted or wire lead options.
The device housing is an opaque plastic which reduces sensitivity to both visible and near IR light that could effect operation. The devices with a covered aperture offer protection against dust whilst open aperture offers better protection against ambient light interference.
Suitable applications for the OPB960, OPB970, OPB980 and OPB990 slotted optical switches include; speed/direction indication, rotary encoders, mechanical switch replacement, mechanical limit indication, printers and sliding door automotive.

Slotted Optical Switches, Optek Technology

Specificaties
Kenmerk Waarde
Output Device Transistor
Typical Rise Time 70ns
Typical Fall Time 70ns
Mounting Type Panel Mount
Package Type Wire
Dimensions 18.47 x 6.35 x 15.63mm
Height 15.63mm
Length 18.47mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -40°C
Slot Width 3.18mm
Width 6.35mm
Series OPB990
Operating Temperature Range -40 → +70°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,52
(excl. BTW)
5,47
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 4,52
10 - 49
€ 4,30
50 - 99
€ 4,07
100 +
€ 3,86
Related Products
This family of slotted optical sensors from Optek ...
Description:
This family of slotted optical sensors from Optek Technology enables you to create a custom device from a standard product line. This flexibility includes choices of slot width, aperture, shell material, mounting configurations and lead spacing, or wires. An opaque ...
Description:
The H21Ax series from Isocom are a family of photointerrupters. They combine an NPN silicon phototransistor with an IR LED within a polycarbonate package. The package also features mounting tabs for fixing down with screws. With a 3 mm gap, ...
The TCST2103, TCST2202, and TCST2300 are transmissive sensors ...
Description:
The TCST2103, TCST2202, and TCST2300 are transmissive sensors that include an infrared emitter and phototransistor, located face-to-face on the optical axes in a leaded package which blocks visible light. These part numbers include options for aperture width. • Package type: ...
This series of slotted optical switches, from Optek ...
Description:
This series of slotted optical switches, from Optek Technology, consist of an IR LED and an NPN silicon phototransistor. They sit within a black plastic housing, mounted on opposite sides of the slot. The OPB827 and OPB828 are designed for ...