RS PRO Straight 50Ω Edge Mount SMA Jack, Solder Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO SMA PCB End Launcher

From the trusted RS PRO brand, this SMA connector is a robust and reliable solution to RF connection and has a DC-18 GHz frequency range. It is edge mounting, so-called because it is designed to be mounted efficiently on the edge of a printed circuit board.

With gold plated beryllium copper contacts, this high-performance SMA end launcher assures a high-quality signal connection.

• Stock number 526-5757 is a 9.52 x 9.52mm square and accepts a PCB thickness of 1.7mm
• Stock number 526-5763 is a 9.52 x 9.52mm square and accepts a PCB thickness of 1.2mm
• Stock number 526-5785 is a 6.35 x 6.35mm square and accepts a PCB thickness of 1.57mm
• Stock number 526-5791 is a 6.35 x 6.35mm square and accepts a PCB thickness of 1.2mm

Features and Benefits

• End launcher SMA Jack
• Subminiature RF Coaxial Socket
• Gold plated body and contact
• Teflon insulator
• 50 Ohm Impedance

Applications

This SMA connector socket is designed for use from DC to 18 GHz, and is designed to connect to appropriate coaxial cable assemblies and SMA plugs with a secure screw-on action. This connector would typically be used in Wi-Fi antenna systems.

This edge mount jack is designed to be used in board-to-board applications, and can be secured and soldered for a sturdy connection.

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Our range of connectors contains plugs, sockets and tool solutions to suit any installation.

Specificaties
Kenmerk Waarde
Gender Female
Mounting Type Edge Mount
Body Orientation Straight
Termination Method Solder
Polarity Normal
Bulkhead No
Impedance 50Ω
Operating Frequency 0 → 18GHz
Body Plating Gold
Mating Type Screw On
Size Subminiature
Voltage Rating 500 V ac
Contact Plating Gold
Contact Material Beryllium Copper
936 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18238 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
5,42
(excl. BTW)
6,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 5,42
15 - 49
€ 5,08
50 - 99
€ 4,81
100 - 249
€ 4,55
250 +
€ 4,33
Related Products
The Connex SMA connectors are semi-precision, sub-miniature, high-frequency ...
Description:
The Connex SMA connectors are semi-precision, sub-miniature, high-frequency connectors which offer reliable broadband performance DC to 18GHz with low reflection and constant 50 ohm impedance. The main features are high mechanical strength, high durability and low VSWR. Matured design principles, ...
50 Ohm professional grade SMA PCB jack with ...
Description:
50 Ohm professional grade SMA PCB jack with a PTFE dielectric, gold plated stainless steel body, gold plated beryllium centre contact and solder terminal.
50 Ohm SMA RF coaxial right angle PCB ...
Description:
50 Ohm SMA RF coaxial right angle PCB mount jack connector made from gold plated zinc alloy with a threaded coupling and gold plated centre contact. This 50 Ohm subminiature SMA right angle PCB jack has 4 x 1.6mm diameter ...
SMA flange mount jack receptacles for microstrip transmission ...
Description:
SMA flange mount jack receptacles for microstrip transmission line circuits with a passivated stainless steel body and epoxy contact captivation. These SMA flange mount jack receptacles are rear panel mounting with panel mount retention and have a gold plated beryllium ...