Molex Straight 50Ω Edge Mount Bulkhead Fitting SMA Jack, Solder Termination

  • RS-stocknr. 800-6949
  • Fabrikantnummer 73251-2123
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Molex 50 Ohm SMA RF Coaxial PCB Jack Connectors

50 Ohm SMA RF coaxial PCB mount Jack Receptacles with a teflon dielectric, gold plated centre contact and brass body with Gold plating except 800-6918 and 800-6936 which have Nickel plated bodies.
These SMA RF coaxial PCB mount Jack Receptacles features are:
759-5293 PCB and Panel mount, supplied with a jam nut and lock washer.
759-5299 Edge mount, 1.6 mm thick PCB, length from PCB edge is 9.53 mm.
759-5252 Right Angle, Through Hole
800-6918 Right Angle, Through Hole Nickel plated
800-6961 Edge Mount, 1.6 mm thick PCB, length from PCB edge is 12.7 mm.
759-5303 Vertical, Through Hole
800-6933 Vertical, SMT
800-6949 Edge and Bulkhead mount (no hardware)
800-6936 Right Angle, PCB and Bulkhead mount, Nickel plated
841-1827 Right Angle, PCB mount, Through Hole
800-6986 Jack to Jack Bulkhead Adapter

Molex SMA RF Coaxial Connectors

The Molex range of high- performance SMA RF Coaxial subminiature Connectors are suitable for microwave frequencies. The SMA design of threaded couplings gives uniform contact of the outer conductors to reduce reflections and attenuation at higher frequencies. High mechanical strength and durability are also ensured by the threaded SMA design.

Specificaties
Kenmerk Waarde
Gender Female
Mounting Type Edge Mount
Body Orientation Straight
Termination Method Solder
Polarity Normal
Bulkhead Yes
Impedance 50Ω
Body Plating Gold
Series SMA
Size Subminiature
Series Number 73251
Contact Plating Gold
Contact Material Beryllium Copper
52 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
811 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,38
(excl. BTW)
6,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,38
10 - 49
€ 4,31
50 - 99
€ 3,77
100 - 249
€ 3,23
250 +
€ 2,96
Related Products
From Samtec, a series of HD (high density) ...
Description:
From Samtec, a series of HD (high density) 75 Ω BNC jacks. The BNC jacks feature the traditional quarter turn bayonet coupling mechanism of standard BNCs but in a reduced size. Increasing the component board population up to 4 x. ...
The BNC is a bayonet style connector allowing ...
Description:
The BNC is a bayonet style connector allowing for quick connect and disconnect with a positive locking mechanism. Mating is achieved with just a quarter turn of the coupling nut. With a classic, dependable design, BNCs are suited to accommodate ...
The FT series of true, feed through, data ...
Description:
The FT series of true, feed through, data connectors for electrical instrumentation are perfect for developing custom I/O configurations for wall plates, rack panels, etc. All fit within a standard XLR panel cutout and use common cabling for front and ...
50 Ohm ZDC BNC RF coaxial insulated bulkhead ...
Description:
50 Ohm ZDC BNC RF coaxial insulated bulkhead socket connectors with bayonet coupling, solder termination and ground tab. These 50 Ohm BNC RF coax insulated bulkhead socket connectors are front panel mounting with a PBT insulator, thermoplastic dielectric, a nickel ...