Schneider Electric 9 A Soft Starter ATSU01 Series, IP20, 4 kW, 200 → 480 V

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Altistart U01

The Altistart U01 is a soft start/soft stop unit for asynchronous motors. It is designed primarily for combinations with TeSys model U controller-starters.
When combined with a TeSys model U, the Altistart U01 is a power option which provides the “Soft start/soft stop” function. The result is a unique, innovative motor starter.
Using the Altistart U01 starter enhances the starting performance of asynchronous motors by allowing the motor to start gradually, smoothly and in a controlled manner.

Control two phases of the motor power supply to limit the starting current and fordeceleration
Internal Bypass relay
Motor power ratings range from 0.75 kW to 15 kW
Motor supply voltages range from 200 to 480 V, 50//60 Hz

An external 24V power supply is required for controlling the starter.

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Specificaties
Kenmerk Waarde
Phase 3
Supply Voltage 200 → 480 V
Current Rating 9 A
Voltage Rating 480 V
Control Voltage 24 V dc
Power Rating 4 kW
IP Rating IP20
Overall Length 113mm
Overall Width 45mm
Overall Depth 154mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Series ATSU01
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
193,80
(excl. BTW)
234,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 193,80
Related Products
May be integrated into a motor control system ...
Description:
May be integrated into a motor control system using other Sirius control gear products, e.g. 3 pole circuit breakers from the 3RV10 range (see Control Gear section)Two phase control, plus soft starting and stopping of three phase asynchronous motorsLow power ...
Soft starters were developed to overcome the drawbacks ...
Description:
Soft starters were developed to overcome the drawbacks of direct on line (DOL) and star-delta starting of single and three phase a.c. induction motors, such as high starting currents, voltage peaks and mechanical snatch.,Soft starters achieve these benefits by controlling ...
The PSE softstarter range is the world’s first ...
Description:
The PSE softstarter range is the world’s first compact softstarters with Torque Control. This makes the PSE range an excellent choice for pumping application where water hammering normally is a big problem. With its compact design and advanced functionality, the ...
The soft starter has become increasingly established as ...
Description:
The soft starter has become increasingly established as an alternative to the star-delta starter. The new DS7 series that combines these benefits with the Eaton xStart system.The DS7 is a fully integral part of xStart and all existing components can ...