- RS-stocknr.:
- 505-5926
- Fabrikantnummer:
- ATSU01N232LT
- Fabrikant:
- Schneider Electric
- RS-stocknr.:
- 505-5926
- Fabrikantnummer:
- ATSU01N232LT
- Fabrikant:
- Schneider Electric
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Schneider Electric 3-Phase Soft Starter, 480V AC Voltage Rating, 15kW Power Rating - ATSU01 Series - ATSU01N232LT
Reliably control your motor-based operations with this 3-phase soft starter from Schneider Electric. It's an electromechanical switch with a contactor and overload protection to protect your motors against electrical overloads. The component helps reduce the torque, load and electrical current surges during power-ups. You can safely and effectively combine this unit with Schneider Electric TeSys Island model U controller-starters for soft start and soft stop functions. This innovative combination enhances the starting performance of asynchronous motors in a controlled manner.
Features & Benefits
• IP20 rating assures you the unit is touch-proof to enhance safety and prevent electric shocks
• Strong plastic body protects internal components against corrosion
• Coordination and rapid fault detection help to quickly resolve problems and resume operations
• Strong plastic body protects internal components against corrosion
• Coordination and rapid fault detection help to quickly resolve problems and resume operations
Applications
• Lifting equipment
• Conveyors
• Compressors
• Textile and paper mills
• Conveyors
• Compressors
• Textile and paper mills
When should I use a soft starter?
Soft starters are suitable for industrial applications with high inertia loads that call for a large inrush of current.
What are the starting and stopping times of this starter?
The soft start and stopping times of this starter are between 1 and 10 seconds.
Schneider Electric TeSys U
The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.
- Faster design with fewer components needed
- Quicker panel build with faster assembly time and fewer wires per starter
- Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
- Flexible and upgradeable with plug-and-play function modules
- Voltage and protection parameters can be determined after assembly and wiring
- Broad band electronic control unit provides improved overload protection with fewer components
- Expandable plug-and–play diagnostics
- Total co-ordination for fast return to service after a short circuit fault
Tesys model U is easy to select:
First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option
Specificaties
Kenmerk | Waarde |
---|---|
Power Rating | 15 kW |
Motor Starter Type | Soft Start |
Range | Altistart U01 and TeSys U |
Voltage Rating | 480 V ac |
Phase | 3 |
Current Rating | 32 A |
IP Rating | IP20 |
Overall Length | 113mm |
Overall Width | 45mm |
Series | ATSU01 |
Overall Depth | 154mm |