Schneider Electric 25 A Soft Start ATS01 Series, IP20, 11 kW, 110 → 480 V

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Altistart Soft Start

May be used with single or three phase motors

Note

Power ratings stated are for 3 phase 400V motors. These units may also be used with lower voltage 3 phase motors and single phase motors. Please refer to technical data sheet for further information.

Specificaties
Kenmerk Waarde
Phase 1, 3
Supply Voltage 110 → 480 V
Current Rating 25 A
Voltage Rating 110 → 480 V
Control Voltage 240 V ac
Power Rating 11 kW
IP Rating IP20
Overall Length 124mm
Overall Width 45mm
Overall Depth 131mm
Minimum Operating Temperature -10 (Without Derating) °C, +40 (With Derating) °C
Maximum Operating Temperature +40 (Without Derating) °C, +50 (With Derating) °C
Series ATS01
20 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
189,20
(excl. BTW)
228,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 189,20
Related Products
Three phase inputControlled deceleration. ...
Description:
Three phase inputControlled deceleration.
The Altistart U01 is a soft start/soft stop ...
Description:
The Altistart U01 is a soft start/soft stop unit for asynchronous motors. It is designed primarily for combinations with TeSys model U controller-starters.When combined with a TeSys model U, the Altistart U01 is a power option which provides the “Soft ...
The Altistart 48 soft start soft stop unit ...
Description:
The Altistart 48 soft start soft stop unit is a controller with 6 thyristors which is used for the torque controlled soft starting and stopping of three phase squirrel cage asynchronous motors. Exclusive Altistart torque control (patented by Schneider Electric)Constant ...
Compact design - width of 22.5mmOne device for ...
Description:
Compact design - width of 22.5mmOne device for entire control voltage range, from UC 24V to 230VOptimal adjustment capability using only 3 potentiometers, start time, starting voltage & stopping time, all of which can be set individuallyOperating status display (Ready/Run) ...