TE Connectivity AMPLIMITE HD-20 Series Panel Mount, 9 Pin Standard D-Sub D-sub Connector Plug, Shell Size E, Solder

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief. These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

Solder termination
Tin or zinc plated shells
EMI shielding and ESD insulation
Shield crimps provide strain relief
Crimped shield termination for low impedance
Anti-solderwicking contact design
Intermateable with other d-sub connectors

Insulation material glass fibre reinforced nylon, UL 94-V0
Contact material nickel-plated phosphor bronze
Contact plating -gold flashed
Wire cross section 0.5mm2max. (AWG 20)

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
D Connector Type Standard
D-Sub Shell Size E
Mounting Type Panel Mount
Body Orientation Straight
Voltage Rating 250 V ac
Termination Method Solder
Current Rating 3A
Contact Plating Gold over Nickel
Series AMPLIMITE HD-20
Contact Material Phosphor Bronze
Length 30.8mm
Depth 15.4mm
4900 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tray of 50)
2,199
(excl. BTW)
2,661
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
50 - 50
€ 2,199
€ 109,95
100 - 200
€ 1,869
€ 93,45
250 - 450
€ 1,649
€ 82,45
500 - 950
€ 1,429
€ 71,45
1000 +
€ 1,345
€ 67,25
*prijsindicatie
Related Products
Compatible with MIL 24308 connectorsHigh reliability and military ...
Description:
Compatible with MIL 24308 connectorsHigh reliability and military performanceLow contact resistanceMonobloc moisture resistantHigh temperature withstand insulatorCable/panel mount versions illustratedOriginal D also available in straight and 90° PCB versionsFor suitable hole cutters see stock no. 477-8690.
From the trusted RS Pro brand, a series ...
Description:
From the trusted RS Pro brand, a series of waterproof panel mount D-Sub connectors. The IP68 panel mount connectors are housed in tough PA66 material and feature distinctive red silicone O-Rings for sealing. The shells are manufactured from professional quality ...
SD series high density D-Sub plug connectors with ...
Description:
SD series high density D-Sub plug connectors with solder cup terminals and precision stamped and formed contacts. These SD series HD d-sub plug connectors have a tin plated steel shell with dimples, a glass-filled thermoplastic UL 94V-0 insulator with closed ...
These waterproof back panel D-connectors and jacks meet ...
Description:
These waterproof back panel D-connectors and jacks meet protection rating IP67 and use an O-ring seal to minimise the extent to which the plug connection protrudes from the panel.