- RS-stocknr.:
- 161-8658
- Fabrikantnummer:
- 5-747904-5
- Fabrikant:
- TE Connectivity
50 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (in een bak van 50)
€ 3,254
(excl. BTW)
€ 3,937
(incl. BTW)
Aantal stuks | Per stuk | Per tray* |
50 + | € 3,254 | € 162,70 |
*prijsindicatie |
- RS-stocknr.:
- 161-8658
- Fabrikantnummer:
- 5-747904-5
- Fabrikant:
- TE Connectivity
Wetgeving en compliance
- Land van herkomst:
- US
Productomschrijving
AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup
A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.
AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.
These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.
AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.
These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.
The AMPLIMITE series are designed to be used in communication and data interfaces.
65% higher density than HD-20 connectors
Space saving
94V0 black thermoplastic insert
Tin plated, steel shell
65% higher density than HD-20 connectors
Space saving
94V0 black thermoplastic insert
Tin plated, steel shell
Features and Benefits
Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
Lower cost, commercial version of the military approved series.
Tin or zinc plated shells, with or without grounding indents.
Crimp snap-in contacts allows loading of only the number of contacts being used.
Available with shielding hardware and shielding enclosure kits.
Numerous cable clamps and mating hardware options.
Low cost, high performance, precision formed crimp contacts.
Lower cost, commercial version of the military approved series.
Tin or zinc plated shells, with or without grounding indents.
Crimp snap-in contacts allows loading of only the number of contacts being used.
Available with shielding hardware and shielding enclosure kits.
Numerous cable clamps and mating hardware options.
Low cost, high performance, precision formed crimp contacts.
Accessories
Crimp contacts – 446-787
Male screw retainers – 450-9208 & 717-4498
Female screw-locks – 717-4543 & 450-9270
Locking post assembly – 450-9365
Spring latch – 450-9321
Latching block with threaded hole – 450-9371
Latching block with slot recess – 680-9392
Male screw retainers – 450-9208 & 717-4498
Female screw-locks – 717-4543 & 450-9270
Locking post assembly – 450-9365
Spring latch – 450-9321
Latching block with threaded hole – 450-9371
Latching block with slot recess – 680-9392
Approvals
UL, cUL, CSA
TE Connectivity AMPLIMITE D-Subminiature Connectors
Specificaties
Kenmerk | Waarde |
---|---|
Number of Contacts | 9 |
Gender | Male |
Body Orientation | Straight |
Mounting Type | Cable Mount |
Pitch | 2.77mm |
D Connector Type | Standard D-Sub |
Termination Method | Solder |
D-Sub Shell Size | E |
Current Rating | 3A |
Housing Material | Steel |
Voltage Rating | 250.0 V |
Length | 30.8mm |
Width | 12.5mm |
Depth | 6.1mm |
Contact Plating | Gold over Nickel |
Dimensions | 30.8 x 12.5 x 6.1mm |
Series | Amplimite HD-20 |
Contact Material | Brass |
Minimum Operating Temperature | -55.0°C |
Maximum Operating Temperature | +105°C |
Contact Size | 20 |