TE Connectivity AMPLIMITE HD-20 Series Panel Mount, 9 Pin Standard D-Sub D-sub Connector Plug, Shell Size E

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief. These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

Solder termination
Tin or zinc plated shells
EMI shielding and ESD insulation
Shield crimps provide strain relief
Crimped shield termination for low impedance
Anti-solderwicking contact design
Intermateable with other d-sub connectors

Insulation material glass fibre reinforced nylon, UL 94-V0
Contact material nickel-plated phosphor bronze
Contact plating -gold flashed
Wire cross section 0.5mm2max. (AWG 20)

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
D Connector Type Standard
Mounting Type Panel Mount
D-Sub Shell Size E
Body Orientation Straight
Voltage Rating 250 V ac
Current Rating 3A
Contact Plating Gold over Nickel
Contact Material Phosphor Bronze
Series AMPLIMITE HD-20
Length 30.8mm
Depth 15.4mm
380 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
845 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,48
(excl. BTW)
3,00
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,48
€ 12,40
25 - 45
€ 2,108
€ 10,54
50 - 95
€ 1,86
€ 9,30
100 - 245
€ 1,612
€ 8,06
250 +
€ 1,488
€ 7,44
*prijsindicatie
Verpakkingsopties
Related Products
From RS PRO a high-performance D-Subminiature connector with ...
Description:
From RS PRO a high-performance D-Subminiature connector with a robust zinc plated steel shell and solder cup terminations that allow the easy connection of wires. These D-sub connectors have an RS232 standard interface and conform to BS9523 F0010 and F0018. ...
SD series high density D-Sub plug connectors with ...
Description:
SD series high density D-Sub plug connectors with solder cup terminals and precision stamped and formed contacts. These SD series HD d-sub plug connectors have a tin plated steel shell with dimples, a glass-filled thermoplastic UL 94V-0 insulator with closed ...
Solder cup d-subs available in 5 industry sizes/positionsStandard ...
Description:
Solder cup d-subs available in 5 industry sizes/positionsStandard Density (9 pin, 15 pin, 25 pin, 37 pin, 50 pin).Nickel or Tin shells available. Low cost economy series.Screw machined contacts offer high reliability. Non-removable contacts.Optional mounting hardware available.Shell: Steel with Tin ...
These waterproof back panel D-connectors and jacks meet ...
Description:
These waterproof back panel D-connectors and jacks meet protection rating IP67 and use an O-ring seal to minimise the extent to which the plug connection protrudes from the panel.