TE Connectivity AMPLIMITE HD-20 Series Panel Mount, 25 Pin Standard D-Sub D-sub Connector Socket, Shell Size B

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.
• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
• Lower cost, commercial version of the military approved series.
• Tin or zinc plated shells, with or without grounding indents.
• Crimp snap-in contacts allows loading of only the number of contacts being used.
• Available with shielding hardware and shielding enclosure kits.
• Numerous cable clamps and mating hardware options.
• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392

Insulation material glass fibre reinforced nylon, UL 94-V0
Contact material nickel-plated phosphor bronze
Contact plating -gold flashed
Wire cross section 0.5mm2max. (AWG 20)

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 25
Gender Female
D Connector Type Standard
D-Sub Shell Size B
Mounting Type Panel Mount
Body Orientation Straight
Current Rating 3A
Voltage Rating 250 V ac
Contact Plating Gold over Nickel
Series AMPLIMITE HD-20
Contact Material Brass
Length 53.1mm
Depth 14.9mm
95 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
560 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
5,402
(excl. BTW)
6,536
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
€ 5,402
€ 27,01
125 - 370
€ 4,32
€ 21,60
375 - 995
€ 3,69
€ 18,45
1000 - 1995
€ 3,50
€ 17,50
2000 +
€ 3,326
€ 16,63
*prijsindicatie
Verpakkingsopties
Related Products
From Amphenol, this SurLok Plus series receptacle is ...
Description:
From Amphenol, this SurLok Plus series receptacle is a compact and quick mating compression lug that features a panel mount flange. Robust and environmentally sealed, the receptacle is field installable and highly reliable.With R4 Radsock technology, the connection assures a ...
From RS PRO a high-performance D-Subminiature connector with ...
Description:
From RS PRO a high-performance D-Subminiature connector with a robust zinc plated steel shell and solder cup terminations that allow the easy connection of wires. These D-sub connectors have an RS232 standard interface and conform to BS9523 F0010 and F0018. ...
Solder cup d-subs available in 5 industry sizes/positionsStandard ...
Description:
Solder cup d-subs available in 5 industry sizes/positionsStandard Density (9 pin, 15 pin, 25 pin, 37 pin, 50 pin).Nickel or Tin shells available. Low cost economy series.Screw machined contacts offer high reliability. Non-removable contacts.Optional mounting hardware available.Shell: Steel with Tin ...
ZD*A Series high density D-Sub plug and socket ...
Description:
ZD*A Series high density D-Sub plug and socket connectors with solder cup terminals. These ZD*A HD d-subminiature connectors have a tin plated steel shell, black glass filled thermoplastic UL 94V-0 insulator and size 22D gold plated brass stamped and formed ...