TE Connectivity AMPLIMITE HD-20 Series Cable Mount, 9 Pin Standard D-Sub D-sub Connector Plug, Shell Size E

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.
• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
• Lower cost, commercial version of the military approved series.
• Tin or zinc plated shells, with or without grounding indents.
• Crimp snap-in contacts allows loading of only the number of contacts being used.
• Available with shielding hardware and shielding enclosure kits.
• Numerous cable clamps and mating hardware options.
• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
D Connector Type Standard
D-Sub Shell Size E
Mounting Type Cable Mount
Body Orientation Straight
Current Rating 3A
Voltage Rating 250 V ac
Contact Plating Gold over Nickel
Contact Material Brass
Series AMPLIMITE HD-20
Length 30.8mm
Depth 6.1mm
Contact Size 20
102 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
91 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,50
(excl. BTW)
3,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,50
10 - 24
€ 2,40
25 +
€ 2,28
Verpakkingsopties
Related Products
From FCT, a series professional grade filtered solder ...
Description:
From FCT, a series professional grade filtered solder pot D-Sub connectors. The plug and socket connectors have tin plated steel shells with 3.1 mm fixing centres and 2.84 mm contact pitch. Signal contacts suitable for 20 AWG wire. Available in ...
AMPLIMITE right angle mounting PCB mount d-sub plug ...
Description:
AMPLIMITE right angle mounting PCB mount d-sub plug and socket connectors with a european standard footprint. These AMPLIMITE PCB d-sub connectors have a tin plated steel shell a black, glass filled polyester housing, solder terminations and are pre-loaded with gold ...
Plug and jack housing with soldered terminals on ...
Description:
Plug and jack housing with soldered terminals on the signal contacts. The housing types are defined as follows: e.g. a 7W2 housing can accommodate 7 hybrid contacts (2 of them being power or coax contacts), see drawing. Power and coax ...
Glenair Micro D Solder Cup Connectors are military ...
Description:
Glenair Micro D Solder Cup Connectors are military standard metal shell connectors ideally suited for making strong and reliable connections within environmental and EMI applications.The Micro D connectors solder cup contacts can accomodate 26 AWG solid or stranded wire. The ...