MBO Solder Paste, 10cm³ Syringe

  • RS-stocknr. 555-232
  • Fabrikantnummer GEL FLUX MOB 39 - SERINGUE DE 10CC
  • Fabrikant MBO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

MOB39 Solder Flux Gel

MOB39 Solder Flux Gel is for descaling surfaces prior to application of solder paste in stencil printing or spot application processes.
It is also used for repairing printed circuit boards.
Non-corrosive residues avoid needing to clean the printed circuit board after soldering.

Syringe/ Dispenser/ Bottles

Specificaties
Kenmerk Waarde
Package Type Syringe
Package Size 10cm³
31 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
203 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
20,79
(excl. BTW)
25,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 20,79
10 - 19
€ 19,97
20 - 49
€ 19,33
50 +
€ 17,68
Related Products
Tack Flux no clean 5cc (for lead-free applications) ...
Description:
Tack Flux no clean 5cc (for lead-free applications) w/plunger & tip. Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applicationsNon-corrosive, non-conductive, no-cleanTack flux will not run all over PCB when ...
Solder Paste in jar 250g (T3) SAC305 no ...
Description:
Solder Paste in jar 250g (T3) SAC305 no clean 88.5% metal. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesPrint gradeCompatible with enclosed print headsPasses BONO test @1.56%RoHS II and REACH compliant. ...
Solder Paste Lead-Free Sn42/Bi57.6/Ag0.4 no clean Low Temperature ...
Description:
Solder Paste Lead-Free Sn42/Bi57.6/Ag0.4 no clean Low Temperature Melts 138C 281F eutectic. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesDispense gradeCompatible with enclosed print headsRoHS II and REACH compliant.
Solder Paste in jar 50g (T3) Sn42/Bi57.6/Ag0.4 Low ...
Description:
Solder Paste in jar 50g (T3) Sn42/Bi57.6/Ag0.4 Low Temperature 90% metal melts @ 138C, 281F. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesPrint gradeCompatible with enclosed print headsRoHS II and REACH ...