TE Connectivity Transparent Solder Sleeve 1.3 → 2.7mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Solder Sleeves and Kit

The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm.

Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connections
Temperature range -55°C to +125°C
Terminate bare or tin plated conductors
Supplied in a storage case with locking lid
Refills available - see Solder Sleeves, as well as other High-Spec Solder Sleeves and Wire to wire Splices.

//media.rs-online.com/t_line/L157295-01.gif
//media.rs-online.com/t_line/L157296-01.gif
//media.rs-online.com/t_line/LD157297-01.gif
Specificaties
Kenmerk Waarde
Minimum Cable Diameter 1.3mm
Maximum Cable Diameter 2.7mm
Sleeve Length 42mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Quantity 1
Colour Transparent
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
55 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Box of 100
48,40
(excl. BTW)
58,56
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 14
€ 48,40
€ 0,484
15 - 49
€ 45,99
€ 0,46
50 +
€ 43,56
€ 0,436
*prijsindicatie
Related Products
SolderSleeve coaxial cable terminators allow easy reliable terminations ...
Description:
SolderSleeve coaxial cable terminators allow easy reliable terminations for various coaxial cable applications. Insulation and strain relieving capabilities SolderSleeve terminators provide the ideal solution to centre conductor breakage problems. SolderSleeve coaxial cable terminators allow dependable economical ...
Commercial Shield Termination with 22 AWG Preinstalled Lead. ...
Description:
Commercial Shield Termination with 22 AWG Preinstalled Lead. Heat Shrinkable radiation cross linked modifoed polyolefin materialThermally stabilized thermoplastic meltable sealing ringDesignd for termination of a bare or tin plated copper shield.
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a ...
Each terminator consists of heatshrinkable sleeve containing prefluxed ...
Description:
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated ...