RS PRO Solder Tab Terminal, Uninsulated, Tin Plated, Right Angle, 7.3 x 6.4mm, M5 Stud Size

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PCB to Wire Terminal Tab Adapters

A range of PCB tab adapters that allow connection between wire terminals and PCB board via female receptacles. These PCB tab or PCB blade adapters have a 6.3 or 6.4mm tab size and are tin plated.
Stock number 534-929 has a 45° angle and an M5 fixing hole.

For use in making connection to printed circuit boards via 6·3mm push-on receptacles, stock no. 488-1235. Terminal material - hot tin dipped brass.Fixing hole for 45° blade M5.
For vertical and horizontal blades, fixing holes 1·5 mm dia. F.C. 5·08.Horizontal type only: first hole to be 5·5 mm from edge of board

Specificaties
Kenmerk Waarde
Tab Size 7.3 x 6.4mm
Tab Angle Right Angle
Stud Size M5
Insulation Uninsulated
Overall Length 17.8mm
Contact Material Brass
Contact Plating Tin
Colour Silver
Number of Tabs 1
Tab Thickness 1mm
Tab Width 6.4mm
17500 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
122900 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,085
(excl. BTW)
0,103
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,085
€ 8,50
500 - 2400
€ 0,074
€ 7,40
2500 - 4900
€ 0,064
€ 6,40
5000 - 9900
€ 0,057
€ 5,70
10000 +
€ 0,05
€ 5,00
*prijsindicatie
Related Products
A 90° 6·3mm push on receptacle accepting wires ...
Description:
A 90° 6·3mm push on receptacle accepting wires 0·75 to 2·3mm2Suitable crimp tool, stock no. 488-1364The PVC cover may be fitted pre or post crimping, avoiding time delaying mistakes.
FASTON 250 series quick connect crimp flag receptacle ...
Description:
FASTON 250 series quick connect crimp flag receptacle terminals that offer speed of application and uniform reliability. Experience over widespread segments of industry has proved this crimp to be the most effective way of assuring stable electrical and mechanical performance. ...
DuraSeal crimp ring terminals with an environmentally sealed ...
Description:
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal ...
RS Pro range of heat shrink ring terminals ...
Description:
RS Pro range of heat shrink ring terminals made from tin plated copper with a brazed seam. These heat shrink ring connectors have a high density PE (polyethylene) heat shrink sleeve which is colour coded to correspond with the wire ...