Weller WHP 1000 Soldering Station Preheating Plate, for use with Flat Silicon Cells

  • RS-stocknr. 667-9264
  • Fabrikantnummer T0053364899
  • Fabrikant Weller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Weller WHP1000 Pre-Heating Plate

Introducing the WHP 1000 pre-heating plate from Weller. A superb device designed to raise the correct working temperature of PCB’s and enable electronic assemblies to be pre-heated prior to repair. Upon inspection, the WHP 1000 offers 4 heating elements each with 250 W of power ideal for use with ceramic and glass boards.

Why is the Pre-Heating Plate important?

Pre-heating plates offer so many benefits such as; components set to the correct working temperature thus ensuring perfect soldering conditions and vastly reduce damage to the PCBs from thermal shock. Ideally, they should be considered as a vital accessory for soldering / de-soldering applications.

Features and Benefits

  • 1000 W/ 230 V

  • Suited for use with silicon cells

  • Ideal for use with ceramic and glass boards

  • Allows board's substrate material to be raised to working temperature without risk of thermal shock

  • 4 X 250 W heating elements

  • Temperature range: 50 °C to 300 °C

  • Digitally controlled

  • Auto Off and Standby Temperature functions

  • Digital temperature display

  • Small benchtop footprint

  • Stainless steel housing

  • ESD safe

  • Can be controlled via the WHA 3000P, WHA 3000V hot air station

  • Easy Cleaning

Compatibility

An integrated RS232 interface enables the device to be controlled externally from the Weller WHA 3000P / WHA 3000V hot air station.
Using an insulated thermocouple Type K the temperature can be monitored in specific locations on the board - RS stock no: 443-7967

Technical Data

  • Dimensions: W.254 x L.280 x H.70 mm

  • Heating plate: 150 x 220 mm

  • Mains voltage: 230 V (120 V); 50 Hz (60 Hz)

  • Power: 1000 W

  • Temperature range: 50°C - 300°C

  • Protection class: 1

Typical Applications

Pre-heating plates are the ideal essential accessory for any Desoldering or Soldering Station application. They are typically used in Electrical & Electronic Servicing and Soldering & De-soldering.

Heating Plates & Solder Baths - Weller

Specificaties
Kenmerk Waarde
Soldering Accessory Type Soldering Station Preheating Plate
Model Number WHP 1000
For Use With Flat Silicon Cells
8 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
1.593,00
(excl. BTW)
1.927,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.593,00
Related Products
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating ...
Description:
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating zone, designed especially for working on small PCBs, universal useControlled, fast and consistent infrared heating of medium wavelengthDigital control electronics and temperature displayPCB holder attached directly to the heating ...
WSR 202 Soldering iron safety rest is WT ...
Description:
WSR 202 Soldering iron safety rest is WT compatible and can be used with various soldering irons. The safety rest holds the soldering iron safely when not in use. 2 in 1Tip retainerMetal, wool, brass and spongeChoose wet and dry ...
Introducing Weller’s desoldering attachment, this is compatible with ...
Description:
Introducing Weller’s desoldering attachment, this is compatible with the Weller DS 80 soldering iron and DS tips. Featuring an external tin collecting tank ideal for removing excess solder and an integrated Kapton ribbon allowing you to easily change the tube. ...
Introducing from Weller, the WHP 80 Pre-heating plate ...
Description:
Introducing from Weller, the WHP 80 Pre-heating plate is great for warming up electronic components and single-sided PC board assemblies. It's for use with WD 1/M, WD 2/M soldering stations or WR rework units. Pre-heating can reduce the thermal shock ...