Weller Zero Smog EL Kit 1 Solder Fume Extraction Kit Fume Extraction Kit

  • RS-stocknr. 100-0147
  • Fabrikantnummer FT91012699N
  • Fabrikant Weller
Wetgeving en compliance
Land van herkomst: HU

Weller Zero Smog EL Kit 1 Soldering Fume Extraction Unit.

The Weller zero smog EL extraction kit is the perfect cost-efficient solution covering small soldering applications. The fume extraction kit has a very high-quality long file brushless turbine which produces a generous suction volume with a high level of extraction power suction volume. With the Zero Smog fume extraction kit you have an on/off switch which helps to save energy and included is an electronic filter monitor complete with an alarm. This fume extractor can operate at up to two work places providing you as the user with maximum health protection. Easily adjustable and easy to install with flexible easy-click 60 arms the Zero Smog fume extraction unit is ready to use in less than 4 minutes.


  • For up to two work-places

  • Changeable medium fine dust pre-filter M5

  • Active carbon foam for effective gas cleaning

  • Portable

  • Place under or next to a bench-top

  • Easy filter change

  • Large HEPA H13 filter surface

  • Longer filter lifetime

  • 4 -speed adjustment for power regulation

  • Additional health protection

  • Filter monitoring

  • Filter alarm

  • Maintenance-free brushless EC turbine

  • Easy-Click system

  • Quick and easy to install

What is Included?
  • Zero Smog EL Fume Extraction unit

  • 1 x flexible and adjustable arm (OF15, 1.5 meters long and a diameter of 60mm)

  • 1 x Funnel nozzle ALFA (225 x 100mm)

  • 1 x Clamp for securing the fume arm

  • Width 335 mm

  • Depth 360 mm

  • Height 445 mm

  • Weight 8.6 kg

  • Pre-filter mat class M5

  • Particle filter H13

  • Active carbon filter (granular activated effective gas filtering).

  • Extracts and filters Solder Fumes

Replacement Filters:
Stock number 391359 – part number T0058762701 – Solder Fume Filter.

  • Voltage 220 to 240 V

  • Heating output 120 VA

  • Maximum 2500 pa

  • Capacity 150 m3/h

Fume Extraction - Weller

Kenmerk Waarde
Model Number Zero Smog EL Kit 1
Pre Filter Type M5 99.5% @ 0.5 microns
Main Filter Type H13 99.75%
Noise Level 53dB(A)
Voltage Rating 230V ac
Wattage 120W
ESD Safe Yes
Remote Control Yes
Plug Type Euro Plug, UK
Depth 360mm
Height 445mm
Width 335mm
Filter Full Alarm Yes
Maximum Airflow Rate 150m³/h
Speed Setting Yes
Extraction Type Volume
Maximum Users 2
30 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 608,00
Related Products
The MX-500 Soldering and Rework System utilizes SmartHeat® ...
The MX-500 Soldering and Rework System utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-regulating heater which ’senses’ its own temperature and closely maintains its pre-set idle temperature for the life of the heater-tip. MX-500SPT Soldering / Tweezer ...
A complete kit for OKI's universal solder iron ...
A complete kit for OKI's universal solder iron tip extraction system. The ingenious clips allow connection to almost all solder ironsLightweight and portable design enables the user to move from station to station easily with minimal setupReplacement clips available separately ...
The Fume cube is designed to protect personnel ...
The Fume cube is designed to protect personnel from inhaling hazardous dust and fumes which are generated during a wide variety of applications, such as tinning and potting, gluing and chemical treatments, soldering assembly, rework and repair. Automatic electronic flow ...
Weller providing clean air in your workplace. Dust ...
Weller providing clean air in your workplace. Dust and fumes are hazardous to health when inhaled.Overexposure can lead toserious and long term medical problems such as occupational asthma, headaches, eye irritation or sionasal cancer. Weller filter systemsoffer the best possible ...