Metcal 2.5 mm Straight Chisel Soldering Iron Tip

  • RS-stocknr. 420-934
  • Fabrikantnummer SFV-CH25A
  • Fabrikant Metcal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

PS800E Tips

Soldering Tip Cartridges "F" series are designed for lead free solder , the system delivers power according to demand , light load or heavy thermal load with “Metcal Smart heat Technology” . Whilst keeping the temperature constant at nominally 380°C.

For use with MFR-PSt and PS-800E systems with MFR-CA2 and PS-CA2 coils

//media.rs-online.com/t_line/L0420934-01.gif

Tips - OKI/ Metcal

Specificaties
Kenmerk Waarde
Model Number SxV
Tip Shape Chisel
For Use With PS-900; MFR-1120; MFR-2220; MFR-2222 System; PS-HC3 & MFR-H2-ST Hand-pieces
Tip Size 2.5 mm
Tip Series SFV
50 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,75
(excl. BTW)
14,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 11,75
10 - 19
€ 11,28
20 - 49
€ 10,93
50 +
€ 9,98
Related Products
The Therma-Boost adjustment system allows you to increase ...
Description:
The Therma-Boost adjustment system allows you to increase power by using the trigger when soldering tin.The red and green lights on the back of the gun indicate whether standard heat mode or enhanced Therma-Boost mode is activated.Power: 30 / 130 ...
From the trusted RS PRO brand, this battery-powered ...
Description:
From the trusted RS PRO brand, this battery-powered soldering iron is the ultimate solution for mobile soldering applications. It features a rechargeable battery, the soldering iron can provide reliable power.With interchangeable tips and accessories supplied, this versatile cordless soldering iron ...
Powered by gas, this iron has an autonomy ...
Description:
Powered by gas, this iron has an autonomy of 3 hours per filling and a heat up time of approximately 30 seconds. It is fully autonomous, thanks to its ignition button.Temperature range between 200 and 500 °C is controlled by ...
Long-life bits in long and short versions, usable ...
Description:
Long-life bits in long and short versions, usable on LR 21 irons for WECP-20, EC 2002 SFA, WS-50 and WSD-50 stations.ET-GW bits are for draw soldering and wave soldering of SMT flat enclosures.