Weller FE 75 Electric Soldering Iron, 80W for use with WRS Rework System; WD Series Soldering Stations

  • RS-stocknr. 405-3395
  • Fabrikantnummer T0052916699N
  • Fabrikant Weller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

FE75, 80 W, Fume Extraction Soldering Iron.

From Weller this is the FE75 Fume Extraction soldering iron complete with an integrated extraction tube assisting in removing the solder fumes from where you are working. The fume extraction tube will not affect the solder temperature at the solder tip therefore not reduce the required outcome of the solder work. The soldering irons have been designed to work with the Zero-Smog fume extraction systems. The tube, extracting the solder fumes, is integrated with the handle of the soldering iron and sits over the solder tip. If you are using the iron when soldering in hard to reach areas the extraction tube can be retracted to allow better access plus, allows cleaning of the tube and soldering tips. The soldering iron heats up to the required temperature within 10 seconds to a maximum temperature of 450°C and includes silver-line heating technology controlling the temperature through suitable temperature-controlled tips.

Features and Benefits.

  • FE75 Soldering iron with fume extraction hose.

  • Can be used with Zero-smog fume extraction systems.

  • Voltage 24 V.

  • Power of 80 W.

  • Heat-up time 10 seconds.

  • Silver-line heating technology (temperature controlled).

  • Temperature range 50°C to 450°C.

  • Tip type HPB.

  • Tip range LT Series.

  • Ergonomic handle.

  • Retractable hose.

  • Easy to clean and maintain.

  • ESD Safe.

  • Can be used with Weller WFE vacuum cleaners (compressed air addition required) or WFE-P (integrated pump).

What's included?

  • FE75 Soldering iron.

  • Fame proof extraction hose (approx. 2.5 m).

  • LT B Chisel soldering tip, 2.4 mm x 0.8 mm – stock number 2778266.

Typical Applications.

  • Electronics. General soldering.

  • Where fume extraction is important.

Weller Solder Iron Tips Available.

  • LT-1S Straight Conical 0.2mm, stock number 2921965.

  • LT-1L Straight Conical 0.2mm, stock number 3610739.

  • LT-1LX Bent Conical 0.2mm, stock number 3610751.

  • LT-1 Straight Conical 0.25 mm, stock number 5186171.

  • LT-1X Bent Conical 0.4mm, stock number 3610767.

  • LT-1SLX Bent Conical 0.4mm. stock number 3610773.
  • LT-S Straight Conical 0.4mm, stock number 3893057.

  • LT-H Straight Chisel 0.8mm, stock number 2922047.

  • LT HX Bent Chisel 0.8mm, stock number 4824535.

  • LT-4X Bent Chisel 1.2mm, stock number 3610795.

  • LT-K Straight Chisel 1.2mm, stock number 2922053.

  • LT 4 Straight Hoof 1.2 mm, stock number 6246460.

  • LT-A Straight Chisel 1.6mm, stock number 2921971.

  • LT AS Straight Conical, 1.6mm, stock number 2921987.

  • LT-AX Bent Chisel 1.6mm, stock number 3610789.

  • LT-L Straight Chisel 2mm, stock number 3610717.

  • SMD LT-GW Straight Hoof 2.3mm, stock number 2922031.

  • LT BX Bent Chisel 2.4mm, stock number 4824507.

  • LT-B Straight Chisel 2.4mm, stock number 2778266.

  • LT BB Straight Knife 2.4mm, stock number 6531465.

  • LT CC Straight Hoof 3.2mm, stock number 6531471.

  • LT CS Straight Conical 3.2mm, stock number 2922019.

  • LT-C Straight Chisel 3.2mm, stock number 2922003.

  • LT-M Straight Chisel 3.2mm, stock number 3610723.

  • LT D Straight Chisel 4.6mm, stock number 5096517.

Other Soldering Irons Available.

  • FE 75, 80 W, for WRS Rework systems.

  • WD soldering stations, stock number 4053396.

  • FE75, 80 W, 34 V, stock number 3610824.

  • FE50M, 24 V, Stock number 518387.

  • FE50, 50 W, 24 V, stock number 1887167.

Power Supply Units Available.

  • WR 2, 300 W, 230 V, stock number 7192608.

  • PU 61, 80 W, 230 V, stock number 4310244.

Note

A spring/funnel set for irons equipped with extraction systems is also available separately.

Station Irons - Weller

Specificaties
Kenmerk Waarde
Power Type Electric
Model Number FE 75
Type Soldering Iron
Wattage 80W
Input Voltage 24V
Tip Series LT
For Use With WRS Rework System; WD Series Soldering Stations
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
208,00
(excl. BTW)
251,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 208,00
Related Products
Desoldering iron for operation with all Weller desoldering ...
Description:
Desoldering iron for operation with all Weller desoldering units with 80 W supplyFinger switch to start the extraction processTin collection container comprising disposable cartridge and filterReplacement suction nozzles available under Stock No. 405-3496 ff.
80W 24V heating plateElectronic temperature control 50°C to ...
Description:
80W 24V heating plateElectronic temperature control 50°C to 200°CHeating surface 85 x 55mm to pre heat PCB'sCan be driven by any suitable rated ’Temtronic’ power unit or rework stationSuitable for use with WS80 stock no. 307-9188, PU80 power unit stock ...
The Antex XS25 range of 25W soldering irons ...
Description:
The Antex XS25 range of 25W soldering irons are straight-forward, robust tools. Perfect for hobbyists and DIYers, through to industrial and production uses, the XS25 soldering irons offer realibility over time. The simple, lightweight body helps to limit fatigue over ...
Provides temperature control where a soldering station is ...
Description:
Provides temperature control where a soldering station is not practical via built-in TCS systemIdeal for on-site service/repair workA small blade screwdriver adjusts the temperature between 200°C and 450°CRS 157-0162 is supplied without a plug.