Antex Electronics Soldering Stand Sponge for use with Soldering Station

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Soldering Iron Sponge

A cellulose sponge supplied as a flat sheet, approx. 140´100´10mm which may be cut in the dry state to size and then moistened with water.

Spares & Replacements - Antex

Specificaties
Kenmerk Waarde
Type Soldering Iron Sponge
For Use With Soldering Station
85 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
996 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 3,58
2,76
(excl. BTW)
3,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,76
Related Products
The PCT-100 is designed to provide extra heat ...
Description:
The PCT-100 is designed to provide extra heat capacity for demanding applications such as lead free, multi-layered boards and assemblies with large ground plates by directly targeting the underside of the PCB. This direct targeting provides a thermal boost for ...
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating ...
Description:
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating zone, designed especially for working on small PCBs, universal useControlled, fast and consistent infrared heating of medium wavelengthDigital control electronics and temperature displayPCB holder attached directly to the heating ...
For the de-soldering of small discrete and multi ...
Description:
For the de-soldering of small discrete and multi leg dual in line packages. Can be driven from all Weller electronically controlled power units and rework stations. Dual heating elements with 2 independent temperature sensors provide the tips with constant temperatureTips ...
Useful rework preparation toolTemperature controlled 50°C to 450°C80W ...
Description:
Useful rework preparation toolTemperature controlled 50°C to 450°C80W Power SourceCan be used to tin wire ends & leads Warm-up time approximately 7 minutesCan be driven by any suitable rated ’Temtronic’ power unit or rework stationSuitable for use with WS80 stock ...