Asco Solenoid Valve Coil 400727-181, Series 552/553 24 V ac

  • RS-stocknr. 656-3399
  • Fabrikantnummer 400727-181
  • Fabrikant Asco
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

CM25 coils For 107 series solenoid valves

CM25 coils for 107 series solenoid valves.
Magnetic heads.
Wire lead with earth bonding.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specificaties
Kenmerk Waarde
For Use With Solenoid valve
Series 552/553
Supply Voltage 24 V ac
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,80
(excl. BTW)
33,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 27,80
5 - 9
€ 26,96
10 +
€ 26,08
Related Products
Voltage tolerance ±10%Rating 100% EDProtection class IP65 (DIN ...
Description:
Voltage tolerance ±10%Rating 100% EDProtection class IP65 (DIN 40050)Electrical connection DIN 43650 table ’C'For use with Nugget 40 and 120 valves.
Fast response, high flow, inline ported valvesWear compensation ...
Description:
Fast response, high flow, inline ported valvesWear compensation system for optimum performance1.2W low power solenoid operators, ordered separatelyNon locking manual overrideIP65 Protection Rating.
Parker solenoid coils are predominantly used with solenoid ...
Description:
Parker solenoid coils are predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. They have been created and designed to withstand and operate in aggressive conditions and ...
Parker solenoid coils are predominantly used with solenoid ...
Description:
Parker solenoid coils are predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. They have been created and designed to withstand and operate in aggressive conditions and ...