KLM-P2L Solenoid Interlock Switch Power to Lock 24 V dc

  • RS-stocknr. 123-7512
  • Fabrikantnummer 202021-SS
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM SAMLOCK KLM Solenoid Interlock Switch

The SAMLOCK KLM is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards.
This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061.

Features and Benefits

Power to lock, stock no. 123-7512
Power to unlock, stock no. 826-3997
Red painted diecast body and stainless steel head
2 lock monitoring safety contacts for high function and diagnostic specification
2 emergency manual release points
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Rotatable head
Connects to most safety relays to give up to PLe Cat.4
3 conduit entry points M20
LED to indicate lock status
IP67 protection
High holding force 2000 N
8 actuator entry positions
30 mm fixing centres

Applications

The SAMLOCK KLM solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries.

Note

Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.

Standards

EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.

Approvals

CE, cULus, TUV.

Specificaties
Kenmerk Waarde
Range SAMLOCK
Series KLM-P2L
Power to Lock / Unlock Power to Lock
Actuator Included No
Actuator Type Various Options
Conduit Entry M20
Length 46mm
Width 176mm
Depth 47mm
Supply Voltage 24 V dc
Safety Contacts 2NC
Dimensions 46 x 176 x 47 mm
IP Rating IP67
Standards Met CE, CULus, TUV
Housing Material Metal
Auxiliary Contacts NC/NO
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
203,94
(excl. BTW)
246,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 203,94
Related Products
A range of accessories for IDEM safety switches. ...
Description:
A range of accessories for IDEM safety switches. Flat Actuator for INCH SeriesAngled Actuator for INCH SeriesPlastic Flexible Actuator for INCH-1 & 3 SeriesStainless Steel Actuator Guide for INCH-1 & 3 SeriesStandard Actuator for KP & K-15 Plastic SeriesStandard Actuator ...
Allen-Bradley Guardmaster 442G Multifunctional Access Box, an integrated ...
Description:
Allen-Bradley Guardmaster 442G Multifunctional Access Box, an integrated access control and guard locking device which provides a complete safeguarding solution for full body access applications. A high holding force, wide tolerance to guard misalignment (+/-5 mm), and an escape release ...
The 440G-LZ Guard Locking Switch is designed for ...
Description:
The 440G-LZ Guard Locking Switch is designed for partial body access guard doors. This switch combines microprocessor technology with an RFID coded actuator, and it features a locking bolt drive mechanism that locks only when the correct actuator is detected. ...
Designed to control the opening of mobile machine ...
Description:
Designed to control the opening of mobile machine guards using an electrical signal or to act as trigger stops for a variety of applications.Power-on locking: bolt extends when power is on, retracts as a cut-off via a built-in spring return.Power-off ...