XCS-TE Solenoid Interlock Switch Power to Unlock 24 V ac/dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: ES
Productomschrijving

XCSTE Solenoid Interlock Switch

Suitable for interlocking small moveable guards (EN1088, EN60204, EN292)
2 positive opening contacts as standard, on guard opening
1 N/C positive internal control contact operated by the solenoid
Key operated lock to allow authorised override of solenoid
Solenoid continuously rated 10VA, voltage limits -20 / +10% (including ripple on d.c.)
Turret heads can be rotated through 360° in 90 steps
8 actuator entries and 1 tapped entry
Contact rating 10VA (Solenoid continuously rated)
15N minimum operating force for positive opening
IP67 rating

Note

Actuators must be purchased separately, see Accessories table.

//media.rs-online.com/t_line/L301996-01.gif
Specificaties
Kenmerk Waarde
Range Preventa
Series XCS-TE
Power to Lock / Unlock Power to Unlock
Conduit Entry M16
Length 93.5mm
Width 33mm
Depth 110mm
Supply Voltage 24 V ac/dc
IP Rating IP67
Safety Contacts 1NO/1NC
Dimensions 93.5 x 33 x 110 mm
Housing Material Plastic
Auxiliary Contacts NC
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
238,00
(excl. BTW)
287,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 238,00
Related Products
From DBK enclosures, this range of conduction/convection PTC ...
Description:
From DBK enclosures, this range of conduction/convection PTC heating elements are 'Self regulating' and housed in a compact flat alloy construction, allowing perfect heat transmission to the thermal medium. This means that no thermal cut-out or thermostat is required. These ...
Stego enclosure heater elements are temperature limiting compact ...
Description:
Stego enclosure heater elements are temperature limiting compact heaters. Designed specifically to prevent condensation within the enclosure these elements are self regulating and offer a dynamic heat up. Small semiconductor heater elements offer an energy saving solution. Screw mounting or ...
The LinkSwitch-II dramatically simplifies low power CV/CC charger ...
Description:
The LinkSwitch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry. The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for transformer and internal parameter ...
The Schneider Harmony XVPC series is a visual ...
Description:
The Schneider Harmony XVPC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.These signal towers ...