440G-T Solenoid Interlock Switch Power to Unlock 24 V ac/dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DO
Productomschrijving

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications

Features & Benefits

Note

The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot.

The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard.

The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs.
The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped.
A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating of IP69K making it suitable for harsh wash down applications as found in the food and beverage, pharmaceutical, solar and semiconductor industries.

TLS-3 specially designed to eliminate the problems of lockout when interfacing solenoid locking switches into dual channel safety relays.

Features & Benefits

Power-to-release or power-to-lock
High locking force £2000 N (450 lb)
Five contacts: 2 NC & 1 NO for door position monitoring 1 NC & 1 NO or 2 NC for lock monitoring
Rotatable head: 4 possible actuator entry positions
Lid mounted status indication
3 manual release points with security screws for use in the event of an emergency
IP69K, suitable for high pressure, high temperature, wash down
Key release lids available for unlocking the locking mechanism in emergencies

Note

Actuator is not supplied and must be ordered separately.

Standards

Conforms to EN 1088 & EN 60947-5-1.

//media.rs-online.com/t_line/L351399-01.gif
//media.rs-online.com/t_line/L357917-01.gif
//media.rs-online.com/t_line/LE357917-01.gif

Incorporates a power-to-unlock function

Warning

With the “power to lock” function, provisions are required to ensure that a dangerous situation cannot result from open circuit faults or power cuts.

Warning

  • With the TLS-2 GD2 “power to lock” style, provisions may be required to ensure that a dangerous situation can not result from open circuit faults or power cuts.
Specificaties
Kenmerk Waarde
Range TLS-1-GD2
Series 440G-T
Power to Lock / Unlock Power to Unlock
Conduit Entry M20
Length 126mm
Width 86mm
Depth 33mm
Supply Voltage 24 V ac/dc
Housing Material Plastic
Auxiliary Contacts NO
Dimensions 39 x 86 x 126 mm
Safety Contacts 2NC
IP Rating IP66, IP67, IP69K
60 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
197 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
214,00
(excl. BTW)
258,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 214,00
Related Products
This Escape Release option of TLS GD2 series ...
Description:
This Escape Release option of TLS GD2 series is intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This ...
Professional range of Bernstein safety limit switches from ...
Description:
Professional range of Bernstein safety limit switches from the SLK series. The limit switches incorporate triple coded anti-tamper mechanism and spring loaded terminals. All models are highly reliable and excellent quality. Cable entry: 3 x M20 x 1.5Separate Actuator (Stainless ...
Ideally suited to replacing traditional tongue interlocks - ...
Description:
Ideally suited to replacing traditional tongue interlocks - same footprint as Trojan tongue interlock.In applications where excessive force can be generated eg rebound of heavy doors, the TLS-GD2 or Atlas should be considered. Supplied with dedicated Spartan actuatorPower to releaseLid ...
Key operated lock to allow authorised override of ...
Description:
Key operated lock to allow authorised override of solenoid (key supplied)2 LED indicators (orange/guard open, green/guard closed, key in locked position)Heavy duty metal compact style to IP67Turret heads can be rotated through 360° in 90 steps8 actuator entries and 1 ...