AZM 161 Solenoid Interlock Switch Power to Lock 24 V ac/dc

  • RS-stocknr. 617-5087
  • Fabrikantnummer AZM 161SK-12/12RKA-024
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Schmersal Solenoid Interlock Switch

The Schmersal AZM161 series power to lock interlock solenoid switch has a power supply voltage rating of 24VAC/DC with 4NC safety and 2NO auxiliary contact configuration. It has double-insulated thermoplastic enclosures with screw terminals.

Note:
Actuating key is not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk as the guarding device can immediately be opened in an event of failure of electrical power supply or when the main switch is opened.

Caution:
EN60947-5-1 standard is only met if the entire system consisting of a safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.

Features and Benefits

Interlock with protection against incorrect locking
Long life
Large wiring compartment
Manual release
Cable entries of 4M16 x 1.5

Certifications

IP67 rated
BG certified
UL listed
CSA certified
IEC/EN60947-5-1
BG-GS-ET-19
CCC certified
EAC certified

Approvals

BG, UL, CSA

Specificaties
Kenmerk Waarde
Series AZM 161
Power to Lock / Unlock Power to Lock
Actuator Included No
Actuator Type Various Options
Conduit Entry M16
Length 90mm
Width 30mm
Depth 130mm
Supply Voltage 24 V ac/dc
IP Rating IP67
Safety Contacts 4NC
Housing Material Plastic
Dimensions 90 x 30 x 130 mm
Auxiliary Contacts 2NO
27 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
196,10
(excl. BTW)
237,28
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 196,10
Related Products
The Telemecanique Sensors XCS-TE series solenoid interlock switch ...
Description:
The Telemecanique Sensors XCS-TE series solenoid interlock switch has a power supply voltage rating of 24VAC/DC. It has 1NO/1NC safety slow break and 1NC auxiliary contacts. The switch is made of plastic housing material and is a power to lock ...
This Escape Release option of TLS GD2 series ...
Description:
This Escape Release option of TLS GD2 series is intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This ...
Double-insulatedIndividual codingCoding level "High" according to ISO 1411990 ...
Description:
Double-insulatedIndividual codingCoding level "High" according to ISO 1411990 mm x 84 mm x 30 mmCompact designInterlock with protection against incorrect locking.Long lifeHigh holding force1 Cable entry M 20 x 1.5Particularly suitable for sliding doorsIDC method of terminationManual release.
Key operated lock to allow authorised override of ...
Description:
Key operated lock to allow authorised override of solenoid (key supplied)2 LED indicators (orange/guard open, green/guard closed, key in locked position)Heavy duty metal compact style to IP67Turret heads can be rotated through 360° in 90 steps8 actuator entries and 1 ...