Celduc 60 A Solid State Relay, Zero Crossing, Chassis Mount, Triac, 280 V rms Maximum Load

  • RS-stocknr. 499-0474
  • Fabrikantnummer SO945460
  • Fabrikant Celduc
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Single-phase solid state relays, SO9 series

Synchronous solid state relay suited to most loads.
TMS2 technology thyristor output ensures longevity.
Voltage protection for input as well as output (VDR) for very high immunity to interference.
Wide control range: 20 → 265 Vac / dc with regulated control current.
Green LED input display.
Solid state relays must be mounted on a heatsink.

Standards

EN60947-4-3 and EN60950

Instantaneous Switching

Note

Temperature can affect current rating; please consult the data sheet for potential derating.

Specificaties
Kenmerk Waarde
Minimum Load Current 5 mA
Maximum Load Current 60 A
Mounting Type Panel Mount
Minimum Load Voltage 12 V ac
Maximum Load Voltage 280 V rms
Maximum Control Voltage 32 V
Switching Type Zero Crossing
Output Device Triac
Dimensions 58.5 x 45 x 29mm
Operating Temperature Range -40 → +100°C
Length 58.5mm
Minimum Operating Temperature -40°C
Height 29mm
Depth 45mm
Control Voltage Range 3 → 32 V dc
Maximum Operating Temperature +100°C
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,96
(excl. BTW)
38,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 31,96
5 - 11
€ 30,98
12 +
€ 29,97
Related Products
Solid-state relay terminal blocks from the Phoenix Contact ...
Description:
Solid-state relay terminal blocks from the Phoenix Contact interface relay module series, with integrated input circuit, output protective circuit and status indicator. Mountable on DIN rail NS 35/7,5, reducing space these units are 6.2mm wide and offer labelling and mounting ...
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...
3-phsase noise filter for measuring relays Noise suppression ...
Description:
3-phsase noise filter for measuring relays Noise suppression of wire bound interferenceBroadband suppression of high frequenciesFor nominal voltages up to 3 AC 1000 VPE connection for increased suppression level2 models available:MK 5130N: depth 97 mmLG 5130: depth 121 mmWidth:22.5 mmApplicationsOperation ...
Range of SMD hybrid technology synchronous solid state ...
Description:
Range of SMD hybrid technology synchronous solid state power relays (close at 0 voltage, open at 0 current: resistive load), low leakage current, silent and with unlimited number of operations.Applications: furnaces, extruders, presses, heating, motor control, solenoids, brakes, home automation, ...