Sensata / Crydom Solid State Interface Relay, 12 V dc Control, 2 A Load, DIN Rail Mount
- RS-stocknr.:
- 720-3988
- Fabrikantnummer:
- DRA-CN240A05
- Fabrikant:
- Sensata / Crydom
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 48,23
(excl. BTW)
€ 58,36
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 48,23 |
| 5 - 9 | € 45,81 |
| 10 - 24 | € 43,41 |
| 25 - 49 | € 40,99 |
| 50 + | € 38,58 |
- RS-stocknr.:
- 720-3988
- Fabrikantnummer:
- DRA-CN240A05
- Fabrikant:
- Sensata / Crydom
Wetgeving en compliance
- Land van herkomst:
- MX
Productomschrijving
Sensata | Crydom Solid-State Interface Relay, Zero-Cross Switching Type, 92.6mm Length - DRACN Series - DRA-CN240A05
Bolster your system with this solid-state interface relay from Sensata | Crydom. It helps to switch your equipment on and off without any moving parts, so there's minimal wear for long-lasting use. Adding this component as a bridge between your PLC and a contactor protects your control device from the load used to power up the rest of the equipment, keeping your setup safe and sound. It's commonly used for commercial kitchen appliances.
• Clips onto a standard 35mm DIN rail for installation in a snap
• Yellow LED status indicator for fast diagnosis
• Wide operating temperature range between -25°C and +60°C for use in demanding environments
• Yellow LED status indicator for fast diagnosis
• Wide operating temperature range between -25°C and +60°C for use in demanding environments
What's the operating voltage range of this device?
It has a wide operating voltage range between 24 and 250V AC, so it's just the thing for use in a wide variety of low-power setups.
What wire size does this component use?
This unit accepts solid and stranded wires between 24 and 14AWG, making it a versatile piece of kit.
Zero Voltage Relays
Note
Temperature can affect current rating; please consult the data sheet for potential derating.
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Control Voltage | 12 V dc |
| Maximum Load Current | 2 A |
| Mounting Type | DIN Rail |
| Maximum Load Voltage | 250 V ac |
| Minimum Control Voltage | 3 V dc |
| Control Voltage Range | 3 → 12 V dc |
| Switching Type | Zero Cross |
| Load Voltage Range | 24 → 250V ac |
| Minimum Load Voltage | 24 V ac |
| Height | 80mm |
| Minimum Load Current | 70 mA |
| Length | 92.6mm |
| Depth | 6.1mm |
| Off State Leakage Current | 4 mA |
| Maximum Operating Temperature | +60°C |
| Minimum Operating Temperature | -25°C |
| Dimensions | 92.6 x 6.1 x 80mm |
| Maximum Turn On Time | 1/2 cycle |
| Manufacturer Part No. | DRA-CN240A05 |
| Operating Temperature Range | -25 → +60°C |