RS PRO HSS 5 → 31mm Cone Cutter

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Sheet metal hole cutter, spiral tap, blank

HSS hole cutter with spiral tap
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck

Supplied with

Set, stock no. 499-261 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm

Warning

  • Not suitable for aluminium. Use without cooling agents.
Specificaties
Kenmerk Waarde
Drill Bit Type Cone Cutter
Material HSS
Minimum Head Size 5mm
Maximum Head Size 31mm
14 op voorraad - levertijd is 1 werkdag(en)
Prijs 1 Set
62,86
(excl. BTW)
76,06
(incl. BTW)
Set(s)
1 +
€ 62,86
Related Products
RS Pro HSS standard cutters are hole cutting ...
Description:
RS Pro HSS standard cutters are hole cutting tools used on piping, tubing or material that require a fine finish hole cut. These cutters optimise cutting edge geometry for increased cutting performance and reduced cutting forces. RS Pro HSS cutters ...
High Speed Steel tapered cone cutter for power ...
Description:
High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required.
HSS TiAlN-coated hole cutter for particularly hard materials; ...
Description:
HSS TiAlN-coated hole cutter for particularly hard materials; glides easily and not prone to wearFor burr-free drilling and planing sheet metal, pipes and profilesSuitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thickCrosswise ...
HSS TiAlN-coated hole cutter for particularly hard materials; ...
Description:
HSS TiAlN-coated hole cutter for particularly hard materials; glides easily and not prone to wearFor burr-free drilling and planing sheet metal, pipes and profilesSuitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thickCrosswise ...