EXACT HSS Cone Cutter 24mm x 40mm

  • RS-stocknr. 499-289
  • Fabrikantnummer 4450114
  • Fabrikant EXACT
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Sheet metal hole cutter, straight tap, HSS TiAlN

HSS TiAlN-coated hole cutter for particularly hard materials; glides easily and not prone to wear
For burr-free drilling and planing sheet metal, pipes and profiles
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick
Crosswise grinding, no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck

Warning

  • Not suitable for aluminium. Use without cooling agents.
Specificaties
Kenmerk Waarde
Drill Bit Type Cone Cutter
Material HSS
Minimum Head Size 24mm
Maximum Head Size 40mm
14 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
60,39
(excl. BTW)
73,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 60,39
Related Products
The Knipex end cutting nippers have been designed ...
Description:
The Knipex end cutting nippers have been designed for cutting edges for soft and hard wire, while be suitable for twisting and binding wire. The head shape provides the optimised movement when tightening steel mesh knots during reinforced concrete work. ...
Since it is the traditional nature of a ...
Description:
Since it is the traditional nature of a return spring to provide greater resistance the more it is compressed, this has been a challenge for ergonomists whose goal is to make work easier and safer. The solution lies in Lindstrom's ...
New head design to increase durability and cutting ...
Description:
New head design to increase durability and cutting capacityCutting edges designed to cleanly cut all types of wire: soft wires and modern materials to a maximum piano wire specification of: - 192A.16CPE : 2.0mm 210 kg/mm² - 192A.18CPE : 2.2mm ...
Section cutters.Highly polished ends.Cut wire at a standard, ...
Description:
Section cutters.Highly polished ends.Cut wire at a standard, preset length of 1.5 mm.Lateral action reduces mechanical impact on components.Adjustment screw (retain/discard) for cut wires.