EXACT HSS 6 → 30mm Step Drill Bit, 13 Steps, 4mm Max Drilling Thickness

  • RS-stocknr. 499-312
  • Fabrikantnummer 50068
  • Fabrikant EXACT
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Step drill, straight tap, HSS TiAlN

HSS step drill with straight tap, two-edged
TiAlN coating, for particularly tough materials
For burr-free drilling and planing sheet metal, pipes and profiles
No centre-punching necessary, drill bits do not run
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick
Diameter specification is lasered on every level
Three-faced driving shaft, prevents slipping in the drill chuck
Sets delivered in a plastic case

Specificaties
Kenmerk Waarde
Drill Bit Type Step Drill Bit
Number of Steps 13
Maximum Drilling Thickness 30mm
Material HSS
Minimum Head Size 6mm
Maximum Head Size 30mm
23 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
62,39
(excl. BTW)
75,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 62,39
5 - 9
€ 60,52
10 +
€ 58,64
Related Products
Fast cutting diamond tipped core drills for near ...
Description:
Fast cutting diamond tipped core drills for near perfect holes in brickwork, masonry, breeze and stoneAs the tip wears, new diamonds are constantly uncovered to ensure that the cutting edge always remains sharpDrills must be used with an adaptor pack ...
Hammer drill with TURBOKEIL centre point and MS5 ...
Description:
Hammer drill with TURBOKEIL centre point and MS5 spiralsChrome-nickel-molybdenum steel, shot-peened and austemperedPerfect spot-drilling and optimum drilling results, even in reinforced concreteOptimum power transmission and controlled clearing of drilling dustSuitable for all hammer drills with SDS-Plus and HILTI ...
• Hammer drill with TURBOKEIL centre point and ...
Description:
• Hammer drill with TURBOKEIL centre point and MS5 spirals• Chrome-nickel-molybdenum steel, shot-peened and austempered• Perfect spot-drilling and optimum drilling results, even in reinforced concrete• Optimum power transmission and controlled clearing of drilling dust• Suitable for all ...
High grade solid carbide PCB drills with 1/8 ...
Description:
High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and ...