EXACT HSS Cone Cutter 5mm x 20mm
- RS-stocknr.:
- 611-5934
- Fabrikantnummer:
- 05285
- Fabrikant:
- EXACT
2 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 55,32
(excl. BTW)
€ 66,94
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 55,32 |
- RS-stocknr.:
- 611-5934
- Fabrikantnummer:
- 05285
- Fabrikant:
- EXACT
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Sheet metal hole cutter, spiral tap, TiAlN
HSS hole cutter with spiral tap
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
TiAlN coating, for particularly tough materials
For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs
Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick
Crosswise grinding means no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Supplied with
Set, stock no. 499-302 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm
Specificaties
Kenmerk | Waarde |
|---|---|
| Drill Bit Type | Cone Cutter |
| Material | HSS |
| Minimum Head Size | 5mm |
| Maximum Head Size | 20mm |