Igus 20mm Bore Spherical Bearing, 5000N Axial Load Rating, 10000N Radial Load Rating

  • RS-stocknr. 488-4931
  • Fabrikantnummer KGLM-20
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

igubal® Spherical Bearings

igubal® Spherical Bearings are very durable, high-performance, self-aligning, maintenance-free polymer bearings that are insensitive to dirt. They are suitable for use within a wide variety of applications where light-weight, corrosion-resistant bearings may be installed. The bearings may be installed for use within environments that include running them dry, within chemicals or other liquids, and offer excellent dampening properties.

Note

igubal® Spherical Bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L488489-01.gif

Rod End & Spherical - Maintenance Free IGUS®

IGUBAL® spherical bearings are self-lubricating, designed to run dry and are maintenance free
The bearings are extremely tolerant to dirt and dust - IGUBAL® can be used in abrasive environments
8 to 20mm bore size
Low weight (20% of equivalent steel)
High rigidity
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30°C to +80°C

Specificaties
Kenmerk Waarde
Bore Size 20mm
Outside Diameter 40mm
Static Axial Load Rating 5000N
Static Radial Load Rating 10000N
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,69
(excl. BTW)
10,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,69
5 - 9
€ 8,33
10 - 24
€ 8,15
25 +
€ 7,97
Related Products
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...
These bearings are designed to accommodate shaft deflection ...
Description:
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals ...
INA from Schaeffler radial insert ball bearings have ...
Description:
INA from Schaeffler radial insert ball bearings have the inner ring located on the shaft with two grub screws offset by 120°. This location method is suitable for bearing arrangements with a constant direction of rotation or, under low speed ...
Single-row deep groove ball bearings are the most ...
Description:
Single-row deep groove ball bearings are the most common type of rolling bearings. These shielded (2Z or ZZ) bearings from NSK are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter into the bearing ...