3/4in Bright Zinc Plated Steel Split Pin, 1/32in Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Split Pins (Cotter Pins)

A range of Imperial size split (cotter) pins made from carbon steel and zinc plated to BS1574.

Specificaties
Kenmerk Waarde
Diameter 1/32in
Length 3/4in
Material Steel
Finish Bright Zinc Plated
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
56 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
5,51
(excl. BTW)
6,67
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 5,51
€ 0,055
*prijsindicatie
Related Products
AMPLIMITE HDE-20 IDC d-sub connector shielding hardware enclosure ...
Description:
AMPLIMITE HDE-20 IDC d-sub connector shielding hardware enclosure kits consisting of a plug or receptacle HDE-20 d-sub connector, an inner shield, an outer shield, an enclosure and two jackscrews (ferrules must be purchased separately - see stock numbers 309-8199 and ...
Steel dowel pinsTo BS / ISO 8734 limits. ...
Description:
Steel dowel pinsTo BS / ISO 8734 limits. Type BSizes 2.5 mm and 3 mm are in soft silver steelSizes 4, 5, 6, 8 and 10 mm are in case hardened mild steelThey are used to retain parts in a ...
Imperial size clevis pins and retaining clips manufactured ...
Description:
Imperial size clevis pins and retaining clips manufactured from mild steel and bright zinc plated for corrosion resistance. The kit includes both pins and clips (176 of each), and is supplied in a plastic compartment storage box. Full dimensional data ...