Freewheel/Bearing CSK-PP 20mm

  • RS-stocknr. 146-5256
  • Fabrikantnummer CSK 20-PP
  • Fabrikant Stieber
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. All the CSK versions are equipped with “formchromed” sprags.

Specificaties
Kenmerk Waarde
Series 6204
Inside Diameter 20mm
Outside Diameter 47mm
Race Width 14mm
Torque 50Nm
Over-running Speed 6000rpm
Dynamic Load Rating 9.4kN
Static Load Rating 4.46kN
Keyway Inner and Outer Race
Drag Torque 1.3Ncm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
102,69
(excl. BTW)
124,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 102,69
5 +
€ 98,57
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
Deep groove ball bearings are versatile. They are ...
Description:
Deep groove ball bearings are versatile. They are simple in design, non-separable, suitable for high speeds and are robust in operation, requiring little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from ...
Suitable for bearing mono-directional axial loadsCan support the ...
Description:
Suitable for bearing mono-directional axial loadsCan support the shaft on one side, but should not be subjected to radial loadsOne-direction axial grooved ball bearingsShaft ring, flat seal and the ballset held in a cageThese bearings come apart, so the bearing ...