Cam Clutch TFS Series, bore 17mm

  • RS-stocknr. 184-5773
  • Fabrikantnummer TFS17
  • Fabrikant Tsubaki
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

TFS Series Cam Clutch is a sprag type clutch designed for press fit installation. Sprag type designs typically have a higher torque capacity than a similarly sized ramp & roller type clutch. TFS has two vertical keyways on the outer race to assist with locating. Outside dimensions are the same as Series 63 ball bearings. This design is ideal for general inner or outer race overrunning applications. Since the TFS Series does not include an integral bearing, installing the TFS Cam Clutch next to a bearing which handles both the axial and radial loads is the typical application. TFS Series ships pre-lubricated with oil.

Specificaties
Kenmerk Waarde
Series TFS
Inside Diameter 17mm
Outside Diameter 47mm
Race Width 19mm
Torque 50Nm
Over-running Speed 1600 (Outer Race) RPM, 3200 (Inner Race) RPM
Keyway Inner Race
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
131,13
(excl. BTW)
158,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 131,13
Related Products
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
Type CSK is a sprag type freewheel integrated ...
Description:
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” ...
Types CSK..P and CSK..PP are sprag type freewheels ...
Description:
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals ...
Types CSK..P and CSK..PP are sprag type freewheels ...
Description:
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals ...