CONCAVE SPRING-LOADED TEST TERMINAL,2A

  • RS-stocknr. 190-3397
  • Fabrikantnummer P1113CA3
  • Fabrikant HARWIN
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

HARWIN Spring Loaded Test Terminal

The HARWIN spring loaded test terminal is a one-piece spring probe that is ready to assemble to the test unit. This test terminal ensures fast multipoint testing of PCB sub-assemblies during development and production. The probe is inserted into the panel (up to the shoulder) and soldered or glued to the panel. Once the probe is fixed in the mounting plate, the wire can be assembled to the rear of the probe. The recommended method is to strip a small length of the wire, wind it around the undercut on the rear of the probe, then solder it in place for electrical connection. To mount multiple spring probes, it is recommended that this probe is assembled at a minimum pitch size of 3mm to ensure electrical performance is maintained.

Features and Benefits

Current rating is 2A
Length is 27mm
Pitch size is 3mm
Gold-plated brass concave probe for locating PCB pins and solder joints to ensure long-term durability
Probe tip type is concave
Operating temperature ranging between -40°C and 85°C

Applications

Aerospace
Energy installation
Medical equipment
Military
Transportation

Certifications

EC1907/2006 (REACH)
SVHC compliant

Specificaties
Kenmerk Waarde
Pitch 3mm
Length 27mm
Body Material Brass
Current Rating 2A
Contact Resistance 50mΩ
Probe Tip Type Concave
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 200)
1,578
(excl. BTW)
1,909
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
200 +
€ 1,578
€ 315,60
*prijsindicatie
Related Products
Being CAT IV rated means these probes can ...
Description:
Being CAT IV rated means these probes can be used for measurements at the supply source in installation, such as the secondary side of medium voltage switchgear, electricity meters and even for employees of power distribution companies overhead lines. Voltage ...
Rigid probes with finger guard and a rear ...
Description:
Rigid probes with finger guard and a rear socket receptacle that can accept 4mm shrouded plugs and leads.,The probes have anti-roll bodies and safety caps (removable) to give non-slip contact with IC legs.,Rated 1000V CAT III.
Rigid, long reach probe that accepts 4mm shrouded ...
Description:
Rigid, long reach probe that accepts 4mm shrouded plugsTip includes a 4mm Multilam® plug to mate with any 4mm socketTip has removable safety cap for non slip contact with IC legsFinger guard has an anti-roll chamferRated at 1000V CAT III ...
Rigid, short reach probe that accepts 4mm plugs. ...
Description:
Rigid, short reach probe that accepts 4mm plugs. The tip includes a 4mm Multilam® plug to mate with any 4mm socket. Handle guard is chamfered on one side for close side-by-side plugging of the probesHandle includes a non slip fluted ...