RS PRO 1.9mm Pitch Spring Test Probe With Needle Tip, 3A

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RS Pro Spring Probe with Needle Point Head

Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 1.9mm
Length 16.35mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Needle
55 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
435 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,88
(excl. BTW)
3,48
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,88
€ 14,40
25 - 45
€ 2,662
€ 13,31
50 - 95
€ 2,448
€ 12,24
100 +
€ 2,23
€ 11,15
*prijsindicatie
Related Products
A range of accessories for use with OM ...
Description:
A range of accessories for use with OM 16 micro-ohmmeter. Mounted on metallic rod with handle5 m cord and locking socket adapted to the OM 16 micro-ohmmeterMeasurement is taken by pressing a point (voltage reading) mounted on a spring. This ...
Spring-loaded terminal for fast multipoint testing of PCB ...
Description:
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.Stock No. 521-601 has a gold-plated ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.
Two Part Spring Probe, 2.54mm (0.1") minimum pitch, ...
Description:
Two Part Spring Probe, 2.54mm (0.1") minimum pitch, Ø1.8mm Spherical Radius Head.Gold finish on probe head and body.Use with receptacle / sleeve S25-022, S25-212 or S25-512.