RS PRO 2.54mm Pitch Spring Test Probe With Needle Tip, 3A

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS Pro Spring Probe with Needle Point Head

Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 2.54mm
Length 24.7mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Needle
80 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
525 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,592
(excl. BTW)
3,136
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,592
€ 12,96
25 - 45
€ 2,398
€ 11,99
50 - 95
€ 2,202
€ 11,01
100 +
€ 2,01
€ 10,05
*prijsindicatie
Related Products
Spring loaded stainless steel needle point probe which ...
Description:
Spring loaded stainless steel needle point probe which reacts resiliently under light pressure. Especially suited to sensitive printed circuits.
Rigid, long reach probe that accepts 4mm shrouded ...
Description:
Rigid, long reach probe that accepts 4mm shrouded plugsTip includes a 4mm Multilam® plug to mate with any 4mm socketTip has removable safety cap for non slip contact with IC legsFinger guard has an anti-roll chamferRated at 1000V CAT III ...
A shrouded, safe range of 2mm products that ...
Description:
A shrouded, safe range of 2mm products that offer an alternative to the popular 4mm range where space and size is a problem.,Meets the requirements of IEC1010-2-031, accepts the 2mm shrouded and non-shrouded plugs.
Test probe safety system with elastic, hardwearing insulating ...
Description:
Test probe safety system with elastic, hardwearing insulating sleeve and slim stainless steel tipTip for piercing insulation/oxide layersØ 4 mm socket connector made from brassSafety test leads can be plugged inFor sliding sleeve and rigid sleeve systemsCAT II and CAT ...