RS PRO Steel 24 Teeth Spur Gear, 24mm Pitch Diam. , 20mm Hub Diam. , 8mm Bore Diam.

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Steel Metric Spur Gears

RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems.

Features and Benefits

• Steel EN8 (080M40/080M46) or equivalent
• Tensile strength: 569N/mm2 (min.)
• 20° pressure angle

Note

SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width.

Standards

DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent

//media.rs-online.com/t_line/L745400-01.gif
//media.rs-online.com/t_line/L745595-01.gif
//media.rs-online.com/t_line/LE745400-02.gif
//media.rs-online.com/t_line/LI745400-01.gif
//media.rs-online.com/t_line/LI745517-01.gif
Specificaties
Kenmerk Waarde
Module 1
Number of Teeth 24
Material Steel
Bore Diameter 8mm
Hub Diameter 20mm
Pitch Diameter 24mm
Face Width 10mm
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,93
(excl. BTW)
10,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,93
5 - 9
€ 8,56
10 - 24
€ 8,37
25 +
€ 8,20
Related Products
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
A range of steel bevel gears. Made from ...
Description:
A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²20° pressure angle.
Injection moulded acetal co-polymer mitre gears giving a ...
Description:
Injection moulded acetal co-polymer mitre gears giving a gear ratio of 1:1. Tensile strength 94N/mm2Hardness (Rockwell R) 110-120Pitch angle 45°, pressure angle 49° 48'Number of teeth 20.
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.