RS PRO Steel 60 Teeth Spur Gear, 90mm Pitch Diam. , 50mm Hub Diam. , 15mm Bore Diam.

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Steel Metric Spur Gears

RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems.

Features and Benefits

• Steel EN8 (080M40/080M46) or equivalent
• Tensile strength: 569N/mm2 (min.)
• 20° pressure angle

Note

SSN10/10B and SSN10/12B are hobbed type pinions with cutter runout after the 5 mm gear face width.

Standards

DIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalent

//media.rs-online.com/t_line/L745517-01.gif
//media.rs-online.com/t_line/L745517-24.gif
//media.rs-online.com/t_line/L745595-01.gif
//media.rs-online.com/t_line/LE745517-24.gif
//media.rs-online.com/t_line/LI745400-01.gif
//media.rs-online.com/t_line/LI745517-01.gif
Specificaties
Kenmerk Waarde
Module 1.5
Number of Teeth 60
Material Steel
Bore Diameter 15mm
Hub Diameter 50mm
Pitch Diameter 90mm
Face Width 15mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
42,42
(excl. BTW)
51,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 42,42
5 - 9
€ 40,70
10 - 24
€ 39,78
25 +
€ 38,91
Related Products
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
Stainless steel spur gears providing a range of ...
Description:
Stainless steel spur gears providing a range of gear ratios. All gears are module 1.0. Made from SUS303 (JIS 4051) stainless steelTensile strength 510N/mm²Pressure angle 20°Dimension E 10mm.
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.
Steel EN8 (080M40/080M46) or equivalent20° pressure angleDIN Standard ...
Description:
Steel EN8 (080M40/080M46) or equivalent20° pressure angleDIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalentStandard tolerance, unless otherwise stated ±0.25mm.