TE Connectivity 640713 Series, 2 Way Strain Relief for use with Universal MATE-N-LOK Connector

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Universal MATE-N-LOK Strain Relief Clamps

A range of Cable clamps / Strain Relief for Mate-N-Lok Connectors. Each article constitutes half of a cable clamp, it is thus necessary to order two of them to facilitate assembly for a complete clamp. The material for these MATE-N-LOK Strain Relief's is a UL 94V-0 or UL 90V-2 rated Nylon.
Stock numbers 680-1903, 710-0090 , 864-9439 are cap housing adapters which anchor the receptacle housing strain reliefs to the housings and prevent distortion of the strain relief when screws are tightened.

Note

Assembly requires two self-tapping screws 3.5 x 10 to 3.5 x 16 (these screws are not supplied)

The TE Connectivity 640713-1 is a strain relief and insert for use with the Universal MATE-N-LOK II series of connectors. This 2-way strain relief is made from Nylon in a natural colour.
A cable clamping insert comes with the strain relief. This piece can be used for additional adjustment for small wire bundles. Alternatively, this piece can be discarded.
Strain relief is essential for supporting the join between a rigid connector and a connection, such as a wire. The 640713-1 provides extra durability and increases the lifespan of the connection.

• For us with MATE-N-LOK II connectors
• Nylon
• 2-ways

Note: cap housing adapters are required when attaching strain reliefs to a cap housing. Two adapters required per housing. This strain relief part number represents one half of a strain relief. Two parts are required per connector.

TE Connectivity Universal MATE-N-LOK™ Range

Specificaties
Kenmerk Waarde
Accessory Type Strain Relief
For Use With Universal MATE-N-LOK Connector
Number of Ways 2
Series 640713
630 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1120 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,997
(excl. BTW)
1,206
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 190
€ 0,997
€ 9,97
200 - 740
€ 0,853
€ 8,53
750 - 2990
€ 0,698
€ 6,98
3000 - 5990
€ 0,663
€ 6,63
6000 +
€ 0,63
€ 6,30
*prijsindicatie
Related Products
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...
The male contact comes in two versions: • ...
Description:
The male contact comes in two versions: • the rigid version is used with 2 to 4 way packages• split version is recommended for 6 to 15 way packages, to reduce the connector insertion forceBlanking pins are provided to block ...
AMP-LATCH Novo wire to board IDC ribbon cable ...
Description:
AMP-LATCH Novo wire to board IDC ribbon cable connectors with centre and military polarized centres and a 2.54 x 2.54 mating grid for 1.27mm pitch ribbon cable. These AMP-LATCH Novo IDC ribbon cable connectors are made from UL 94V-0 thermoplastic ...
A range of TE Connectivity slide on covers ...
Description:
A range of TE Connectivity slide on covers to protect terminated MTA sockets.Part numbers X-640550-X are dust covers for MTA-100 IDC closed end connectorsPart numbers X-640642-X are dust covers for MTA-100 IDC feed thru connectorsPart numbers X-643075-X are strain relief ...