Deutsch IMC Series, 1 Way Strain Relief Sleeve for use with IMC 200

  • RS-stocknr. 314-7073
  • Fabrikantnummer IMC2AD
  • Fabrikant Deutsch
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Strain Relief Adaptor, Boot and Dust Cap

The strain relief adaptor and Boot are push fit on to the rear of the cable plug or socket. The adaptor includes a boot & cable clamp.

Available in this Range

• Stock No. 314-7067 is a 100 Series Stain Relief Adaptor
• Stock No. 314-7073 is a 200 Series Strain Relief Adaptor
• Stock No. 314-7023 is a 100 Series Socket Dust Cap
• Stock No. 314-7051 is a 200 Series Socket Dust Cap
• Stock No. 314-6935 is a 100 Series PVC Boot with a 5.08mm Outer Diameter
• Stock No. 314-6991 is a 200 Series Santoprene Boot with a 6.35mm Outer Diameter
• Stock No. 314-6979 is a 200 Series PVC Boot with a 3.17mm Outer Diameter
• Stock No. 314-7001 is a 200 Series PVC Boot with a 4.19mm Outer Diameter

100 / 200 Series

Designed for industrial use where heat, dust, moisture and common oils and chemicals are prevalent, this range offers compact multipole connection where space is at a premium. Typically, these connectors are suitable for use on test equipment, industrial sensors, medical equipment, instrumentation and control systems.

Plugs and receptacle may be fitted with either crimp pins or sockets
Integral cable clamp
Bayonet locking
Wide range of accessories

Specificaties
Kenmerk Waarde
Accessory Type Strain Relief Sleeve
For Use With IMC 200
Number of Ways 1
Series Number 200
Series IMC
99 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
472 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,86
(excl. BTW)
7,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 5,86
15 - 49
€ 5,74
50 - 99
€ 5,63
100 - 249
€ 5,45
250 +
€ 5,27
Related Products
AMP-LATCH Novo wire to board IDC ribbon cable ...
Description:
AMP-LATCH Novo wire to board IDC ribbon cable connectors with centre and military polarized centres and a 2.54 x 2.54 mating grid for 1.27mm pitch ribbon cable. These AMP-LATCH Novo IDC ribbon cable connectors are made from UL 94V-0 thermoplastic ...
TE’s Novo series IDC ribbon cable connectors are ...
Description:
TE’s Novo series IDC ribbon cable connectors are designed to work hand in hand with compatible flat ribbon cables to create a cable assembly. With military and centre polarization, the Novo series is to be used with wire to board ...
AMP-Latch strain reliefs made from glass filled polyester.Part ...
Description:
AMP-Latch strain reliefs made from glass filled polyester.Part numbers X-1437020-X & X-1437021-X are strain reliefs 609 series female socket connectorsPart numbers X-499252-X are strain reliefs for AMP-Latch Novo and Ultra ATA complaint bus connectorsPart numbers X-111547-X are strain reliefs for ...
Free plugs (15.0mm dia.) which mate with panel ...
Description:
Free plugs (15.0mm dia.) which mate with panel mount sockets all incorporating PEEK insulating material. Terminations are by solder bucket.,The free plugs are supplied with collets to take a maximum cable diameter of 9mm. Smaller collets are available separately. For ...