TE Connectivity 9 Way Strain Relief Kit for use with Metrimate Square Grid Plugs & Receptacles

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Strain Relief Kits for Metrimate Square Grid Plug and Receptacle Connectors

Strain relief kits for use with Metrimate square grid plug and receptacle connectors. These Metrimate strain relief kits are made from red 94V-0 rated thermoplastic and are supplied with cable gates in order to accommodate various cable diameters up to the maximum specified.
Stock number 717-4647 is a 6 way strain relief kit that accepts a max cable diameter of 9.5mm
Stock number 710-0081 is a 9 way strain relief kit that accepts a max cable diameter of 11.7mm
Stock number 302-0675 is a 12 way strain relief kit that accepts a max cable diameter of 13.45mm
Stock number 302-0681 is an 18 way strain relief kit that accepts a max cable diameter of 16.5mm
Stock number 302-0704 is a 24 way strain relief kit that accepts a max cable diameter of 19.05mm
Stock number 302-0710 is a 36 way strain relief kit that accepts a max cable diameter of 23.3mm

Max. cable diameter
Max. cable diameter  
Ways (mm)
12 13.45
18 16.5
24 19.05
36 23.3
Voltage rating 440V (in compliance with IEC);
380V a.c. (in compliance with VDE 110 group B)
Pitch 5.0mm

5mm Pitch connectors
For panel or free mounting
Higher pinout than the Mate-N-Lok range

Specificaties
Kenmerk Waarde
Accessory Type Strain Relief Kit
For Use With Metrimate Square Grid Plugs & Receptacles
Number of Ways 9
66 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,92
(excl. BTW)
5,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 4,92
20 - 74
€ 4,28
75 - 299
€ 3,85
300 - 599
€ 3,53
600 +
€ 3,31
Verpakkingsopties
Related Products
Rugged, cost effective industrial or public use, vandal ...
Description:
Rugged, cost effective industrial or public use, vandal resistant keypadsKeypads can be mounted from the rear, via mounting holes in the back of the keypad housing, or by utilising the mounting kitMounting kit comprising silicone sealing gasket and 2 ABS ...
AMP-Latch strain reliefs made from glass filled polyester.Part ...
Description:
AMP-Latch strain reliefs made from glass filled polyester.Part numbers X-1437020-X & X-1437021-X are strain reliefs 609 series female socket connectorsPart numbers X-499252-X are strain reliefs for AMP-Latch Novo and Ultra ATA complaint bus connectorsPart numbers X-111547-X are strain reliefs for ...
TE’s Novo series IDC ribbon cable connectors are ...
Description:
TE’s Novo series IDC ribbon cable connectors are designed to work hand in hand with compatible flat ribbon cables to create a cable assembly. With military and centre polarization, the Novo series is to be used with wire to board ...
A range of TE Connectivity slide on covers ...
Description:
A range of TE Connectivity slide on covers to protect terminated MTA sockets.Part numbers X-640550-X are dust covers for MTA-100 IDC closed end connectorsPart numbers X-640642-X are dust covers for MTA-100 IDC feed thru connectorsPart numbers X-643075-X are strain relief ...