Strain Relief Clip for use with UTG Series

  • RS-stocknr. 220-7073
  • Fabrikantnummer UTG 18AC
  • Fabrikant Souriau
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BE
Productomschrijving

Cable Clamp with Strain Relief

Souriau Trim Trio Metalok & Shielded Bantams

Flammability rating UL94V0
2 VDE 0110 Group C versions 3 and 7 ways
Moulded keyways ensure error free mating
Standard shell sizes and contact arrangements
High conductive copper alloy
Gold flash or tin plate options
Incorporating stainless steel spring for contact retention
Gold flash or tin plate options

Trim Trio Metalok Bantam Plastic circular connectors, derived from MIL-C-26482, with a secure metal coupling system to provide the complete solution for lightweight, robust industrial interconnections. Shell material is glass filled thermoplastic, with a rated operating temperature of -55°C to +125°C. Contacts to be ordered separately see typically stock no. 437-3712
Plastic connectors, nickel plated to outer body and bayonet ring to satisfy EMC requirements. Cable mounting shells are supplied with metal PG tube, containing twin ferrule system for 360° cable shield continuity. The 2 shells are polarised and locked together by a bayonet action metal ring.
The COM8-1 tool 266-6860, provides an 8 point impression crimp assuring maximum tensile strength on wire sizes up to 2.5mm². The cycle controlled, precision ratchet assures consistent and accurate crimping over many operations.

Note

Panel mounting plug shells with pin inserts will only mate with cable-mounting shells with socket inserts and panel mounting shells with socket inserts will only mate with cable-mounting plug shells with pin inserts. Contacts must be ordered separately.

Specificaties
Kenmerk Waarde
Accessory Type Strain Relief Clip
For Use With UTG Series
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
332 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,91
(excl. BTW)
8,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 6,91
15 - 49
€ 6,74
50 - 99
€ 6,62
100 - 249
€ 6,49
250 +
€ 6,15
Related Products
For use with class II sockets, stock nos. ...
Description:
For use with class II sockets, stock nos. 121-0810 and 120-6798.
Stainless steel cable strain reliefs for use in ...
Description:
Stainless steel cable strain reliefs for use in conjunction with 3M Class II D connectors. Snap-fit onto the connector after cable assembly.
Socket retainer clips for securing mating socket connectors ...
Description:
Socket retainer clips for securing mating socket connectors to the 2500 Series 2.54mm x 2.54mm low profile headers. These socket retainers are made from stainless steel with a grey polyurethane coating and fit a variety of connector sizes.Part numbers 3505-80XX ...
From Amphenol, this strain relief cable clamp is ...
Description:
From Amphenol, this strain relief cable clamp is for use with the 62 GB series of MIL Spec connectors, and comes complete with a grommet nut. The adjustable clamp prevents the flexing of wires in the grommet nut, which maintains ...